Ajax Superior HomeSiren Jeweller | Wireless Indoor Siren | PD 6662 Compliant
Summary
The Superior HomeSiren Jeweller is a wireless indoor siren designed for professional security installations as part of Ajax Systems’ Superior product line. This powerful notification device combines a 105 dB acoustic alarm with customizable LED indication to alert users and deter intruders during security events. The siren provides comprehensive feedback for system status changes, entry/exit delays, and alarm conditions.
Operating on the secure Jeweller wireless protocol, the siren communicates with compatible Ajax hubs at ranges up to 2,000 meters in open space. The device features pre-installed batteries providing up to 5 years of autonomous operation, along with a socket for connecting an external LED indicator. The Superior HomeSiren Jeweller offers four volume levels (Muted, Quiet at 81 dB, Loud at 93 dB, and Very Loud at 105 dB) and adjustable alarm duration from 3 seconds to 3 minutes.
Available exclusively through accredited Ajax Systems partners, the Superior HomeSiren Jeweller includes enhanced security features such as device authentication, jamming detection, and a SmartBracket mounting system with holding screw for anti-tamper protection. The siren supports advanced functionality including Chime notifications for opening detectors, configurable beeps for arming/disarming events, and after-alarm LED indication that continues flashing until the system is disarmed.
Features
- Wireless indoor siren with 105 dB maximum sound output (measured at 1 meter)
- Four adjustable volume levels: Muted, Quiet (81 dB), Loud (93 dB), Very Loud (105 dB)
- Jeweller wireless protocol with encrypted communication and up to 2,000 meter range in open space
- Pre-installed batteries providing up to 5 years of operation (with 1-minute polling interval)
- Configurable alarm duration from 3 seconds to 3 minutes in 3-second intervals
- LED indicator with three modes: Off, Armed (flashes when armed), Always (flashes regardless of mode)
- Socket for connecting external third-party LED indicator (3V, 10mA output)
- SmartBracket mounting panel with holding screw for tamper-resistant installation
- Built-in tamper protection detecting removal attempts from surface or mounting panel
- Beep notifications for arming/disarming, entry/exit delays, and Night Mode activation
- Chime function for opening detector notifications when system is disarmed
- After-alarm LED indication that flashes until system is disarmed
- Fast beep warnings for last 5, 10, or 15 seconds of entry/exit delays
- Compatible with Ajax Hub Plus, Hub 2 series, and Superior Hub Hybrid models
- Works with ReX and ReX 2 radio signal range extenders
- Group Mode support for multi-area security systems
- Configurable response to individual device alarms and tamper events
- Remote configuration and control via Ajax PRO mobile app
- Operating temperature range from -10°C to +40°C (14°F to 104°F)
- IP50 protection rating for indoor use
- Compliance with EN 50131-4 (Grade 2), PD 6662:2017, INCERT, SSF, and NFA2P standards
- Events transmitted to monitoring stations via SurGard, SIA DC-09, ADEMCO 685, and other protocols
- Available in white or black matte finish
FAQs
What is the maximum sound output of Superior HomeSiren Jeweller?
The siren has a maximum sound output of 105 dB when set to “Very Loud” mode, measured at a distance of 1 meter. It also offers three other volume levels: Quiet (81 dB), Loud (93 dB), and Muted (no sound). The volume can be configured separately for alarms and for notification beeps.
How long does the battery last?
The pre-installed batteries provide up to 5 years of autonomous operation with a 1-minute polling interval, or at least 6 hours of continuous buzzer sound. Battery life may vary depending on usage patterns, signal strength, temperature conditions, and frequency of alarms. The system provides early warning notifications when the battery is low.
Can I connect an external LED to the siren?
Yes, Superior HomeSiren Jeweller includes a socket for connecting an external third-party LED indicator. The external LED works in parallel with the built-in LED and replicates all its signals. The output provides 3V at 10mA. Observe polarity when connecting, with the black terminal wire being the positive (+) contact.
What is the difference between Superior and Baseline HomeSiren models?
Superior HomeSiren Jeweller features an enhanced battery for longer life, a SmartBracket mounting panel with a holding screw for added security, and is available exclusively to accredited Ajax Systems partners. The Baseline version uses a common battery, has a SmartBracket without holding screw, and is available for all PROs.
What is the Chime function?
Chime is a feature that uses a special sound to inform about the triggering of opening detectors when the system is disarmed. It’s commonly used in retail stores to notify employees when someone enters the building. To use Chime, you must enable it in both the siren settings and the opening detector settings.
What is after-alarm LED indication?
After-alarm LED indication is a feature where the siren’s LED (and external LED if connected) continues to flash twice approximately every 3 seconds after an alarm has occurred, until the system is disarmed. This allows users and security company patrols to see that the system was triggered even after the alarm sound has stopped. This feature can be configured in the hub settings.
Can I set different alarm responses for different devices?
Yes, you can separately configure the siren’s reaction to alarms from each detector in your system through the Ajax app. In each device’s settings, you’ll find an “Alert with a siren” option that can be enabled or disabled. This is useful if you don’t want the siren to activate for certain devices, such as water leak detectors.
Does the siren work with Group Mode?
Yes, Superior HomeSiren Jeweller supports Group Mode. You can assign the siren to a specific group or to all groups. If assigned to a specific group, it will only notify about alarms and events from that group. If assigned to all groups, it will notify about alarms and events from all groups in the system. Note that the siren will always respond to Night Mode activation and alarms regardless of group assignment.
What hubs are compatible with Superior HomeSiren Jeweller?
The siren requires an Ajax hub running OS Malevich 2.16 or higher. Compatible models include Hub Plus, Hub 2 (2G), Hub 2 (4G), Hub 2 Plus, Superior Hub Hybrid (2G), and Superior Hub Hybrid (4G). It also works with ReX and ReX 2 radio signal range extenders. Up to 10 sirens or keypads with built-in sirens can be connected to one Ajax hub.
Can Superior HomeSiren Jeweller be used outdoors?
No, the device is designed exclusively for indoor use. Installing it outdoors can lead to siren failure and will void the warranty. The operating temperature range is -10°C to +40°C (14°F to 104°F) with humidity up to 75%.
Specifications
- Device Type: Wireless indoor siren with LED indicator
- Maximum Sound Level: 105 dB at 1 meter distance
- Volume Levels: Muted, Quiet (81 dB), Loud (93 dB), Very Loud (105 dB)
- Alarm Duration: 3 seconds to 3 minutes (adjustable in 3-second intervals)
- Wireless Protocol: Jeweller (868.0–868.6 MHz frequency band)
- Communication Range: Up to 2,000 meters (6,550 feet) in open space
- Battery Type: 2 × CR123A (pre-installed)
- Battery Life: Up to 5 years (with 1-minute polling interval)
- Buzzer Operation Time: At least 6 hours of continuous sound
- External LED Connection: Available, 3V⎓ 10mA output
- LED Indication Modes: Off, Armed, Always
- Operating Temperature: -10°C to +40°C (14°F to 104°F)
- Operating Humidity: Up to 75%
- Protection Rating: IP50
- Dimensions: 75 × 76 × 27 mm (2.95″ × 2.99″ × 1.06″)
- Weight (Black): 92 grams (3.25 oz)
- Weight (White): 94 grams (3.32 oz)
- Color Options: White or black
- Mounting: SmartBracket with holding screw
- Tamper Protection: Yes
- Piezoelectric Buzzer Frequency: 3.5 ± 0.5 kHz
- Compatible Hubs: Hub Plus, Hub 2 (2G/4G), Hub 2 Plus, Superior Hub Hybrid (2G/4G)
- Compatible Range Extenders: ReX, ReX 2
- Maximum Sirens Per Hub: 10 (sirens or keypads with built-in sirens combined)
- Required Hub OS: OS Malevich 2.16 or higher
- Standards Compliance: EN 50131-4 (Grade 2), PD 6662:2017, INCERT, SSF, NFA2P
- Warranty: 2 years (excluding batteries)
Downloads
- Datasheet (Adobe PDF)
- User Manual (Adobe PDF)
