Premier EX Pro Automatic Extinguishing Panel
- Combined fire and extinguishing control panel
- 4 x 20 LCD display with countdown timer
- EN54 parts 2 & 4, EN12094 part 1 approved
Complete the setup
Filters
×
C-Tec EP203 Automatic Extinguisher Panel
- Three zone panel
- 128 x 64 pixel display
- EN54-2/4 certified
Complete the setup
Hand-picked accessories for this item
Kidde Commercial NC Series Conventional 3 Zone Extinguishing Panel
- Three configurable fire zones supporting up to 32 devices each
- Networkable version available with support for up to 32 nodes including conventional and addressable panels
- Modern design with an intuitive user interface
Haes Esprit-G Single Flood Area 3.4A Extinguishant Release Panel
- Single flood area extinguishant control
- Large graphical display interface
- EN12094-1, EN54-2 & EN54-4 approved
Kentec Sigma XT Extinguishing Control Panel
- Three detection zones with flexible zone combinations
- Built-in extract fan control functionality
- EN12094-1, EN54-2 & EN54-4 approved
Complete the setup
Hand-picked accessories for this item
Kentec Sigma XT+ Extinguishant Coincidence Unit
- Dual extinguishant outputs with main/reserve facility
- EN12094-1, EN54-2 & EN54-4 approved
- Two fully monitored coincidence inputs
Complete the setup
Hand-picked accessories for this item
Advanced ExGo Three Zone Automatic Gas Extinguishing Panel
- Three zone conventional detection with single flood area
- Backlit 128 x 64 LCD display with digital countdown
- EN12094-1, EN54-2, EN54-4 & EN54-13 approved
Advanced ExGo Remote Status Indicator (RSI) | Extinguishing System Repeater | Display Only or Manual Release Options
- Four model options from display-only to full manual release with mode select
- RS485 network connectivity supporting up to 7 indicators per ExGo control panel
- Compact 190mm x 235mm x 45mm enclosure with surface or semi-flush mounting
Complete the setup
Hand-picked accessories for this item
Advanced ExGo Relay Output Card | Expansion Module | Choice of 2-Way (RSI) or 8-Way (Control Panel)
- Available in 2-way (EXP-007) or 8-way (EXP-008) configurations for different system sizes
- Volt free clean contact outputs rated at 1 Amp 30V AC/DC for versatile interfacing
- Direct motherboard connection with individual programmable relay outputs
Complete the setup
Hand-picked accessories for this item
Kentec Sigma XT+ Multi-Area Extinguishant Control Panel
- Multi-area control - 1 to 4 extinguishant areas
- Dual extinguishant outputs per area with main/reserve configuration
- EN12094-1, EN54-2 & EN54-4 approved
Premier EX Pro Remote Status Indicator (Repeater)
- Compact repeater for EX-Pro system
- Maximum of 10 per system
- Connects via RS485
C-Tec EP203 Remote Status Unit
- Remote system status display
- Manual release button
- Auto/manual keyswitch
Complete the setup
Hand-picked accessories for this item
C-Tec EP203 Economy Status Unit
- Three LED indicators
- Auto/manual keyswitch
- Compact design
Complete the setup
Hand-picked accessories for this item
C-Tec EP203 Hold/Abort Button
- Hold/abort functionality
- Surface or flush mount
- Two label options
Complete the setup
Hand-picked accessories for this item
Kentec Sigma SI Extinguishant Status Indicator
- BS EN12094-1 certified when used with Sigma XT control equipment
- High brightness LED indication with detailed panel status
- Countdown timer shows time remaining until release
Kentec Sigma XT Extinguishant Hold Off
- Compatible with all EN approved Kentec extinguishing panels
- Shrouded push button prevents inadvertent operation
- Holds extinguishant release countdown when activated
Kentec Sigma XT Extinguishant Abort Button
- Large red mushroom head pushbutton for high visibility
- Twist to release latching action prevents accidental reset
- Compatible with all Sigma XT+ control panel models
Kentec Sigma XT Extinguishant Extract Key Switch
- Controls extract fan plant for fire protection systems
- Common '901' keyswitch with key trapped in operated position
- Compatible with all Sigma XT and Sigma XT+ models
Kentec Sigma XT Main/Reserve Duty Extinguishant Keyswitch Unit
- Common '901' keyswitch standard across fire systems
- Compatible with Sigma XT and Sigma XT+ models
- Surface or single gang flush mounting options
Zeta CP4 Gas Extinguishing Call Point
- EN54-11 approved resettable manual call point in yellow
- Patented spring-free mechanism mimics break glass feel
- High visibility reflective flag indicator for alarm condition
Colour Yellow
Zeta Gas Abort Blue Manual Call Point
- Gas abort manual call point in blue housing
- Single pole changeover
Premier EX Pro Output Expansion Relay PCB
- Expansion board with either 3 or 8 voltage-free changeover relay contacts
- Mounted inside Premier Ex Pro panel
C-Tec EP203 Output Expansion Relay Board
- Five relay contacts
- Mounts inside EP203
- Volt free relays
Complete the setup
Hand-picked accessories for this item
C-Tec EP203 System Line Terminator
- Terminates release output
- Compact design
- Active LED indicator
Complete the setup