Disabled Toilet Alarms

• BS8300 and DDA compliant wireless system
• Battery or mains powered options available
• Supports up to 8 wireless devices per controller

• BS8300 compliant emergency assistance alarm system
• Combined ceiling and wall mountable pull cord design
• 24 hour standby battery with call acknowledgment functionality

• Complete stand alone kit with all components included
• Dual loop pull cord with high contrast labels and blue indication
• Simple 2 wire system with limited cabling requirements

• Complete WC alarm kit with integral 1-Zone controller and PSU
• Fully compliant to BS 8300-2:2018 for accessible toilet requirements
• Monitored alarm input with open and short circuit detection

• Complete WC alarm kit with integral 1-Zone controller and PSU
• Fully compliant to BS 8300-2:2018 for accessible toilet requirements
• Monitored alarm input with open and short circuit detection

• DDA compliant wireless toilet alarm system with no wiring required
• Simple 2-screw installation with flexible positioning options
• Available in Kit 1 (multi-pull) and Kit 2 (single-pull with reset point) configurations

• Assist Call battery backup for ViAC-PSU.
• Brushed stainless steel finish.

• Visual indication of 800 Series Alarm calls with red lights for Standard and Emergency calls
• Highly visible design with dual red LEDs and a triangular diffuser
• Versatile mounting options on standard UK back boxes

• Can be used to generate a standard call on an 800 Series Conventional Call System.
• Typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be cancelled.
• Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm.
• Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made.
• Surface mountable.
• Base fits 16mm conduit and BESA centres.

• Allows calls from the NC807C ceiling pull unit to be cancelled from inside the toilet
• Provides visual and audible indication to the user that their call has been acknowledged and help is on the way
• Can be mounted on a standard UK single gang back box and is also available as part of the NC951 accessible toilet alarm kit

• The cord has integral properties that can help prevent the spread of infections such as MRSA, E.coli, C.diff, and Norovirus
• The pack is easy to clean using a cloth and mild detergent
• It is compatible with a wide range of ceiling pull units from various manufacturers

• High-quality brushed stainless steel construction for enhanced durability and aesthetics
• Complete single zone emergency assistance alarm kit with all necessary components
• Simple pull cord activation system for reliable emergency response

• Complete disabled toilet alarm system for 1, 2, 3 or 4 toilets/areas
• 4 zone controller supplied with all versions allowing for future expansion
• Controller can be powered by either 12V DC or 240V AC

• Easy to use.
• Hand programmable.
• Out of range indicator.
• Time, date and alarms message time stamps.

• Easy Installation
• Complies with British Standards
• Repeater/Booster Available
• Simple, effective design

• Easy Installation
• Complies with British Standard
• Single and Multi Pull Variations
• Paging Facilities Available

Enter a brief description of your product here. This description will be displayed on product list pages.

• Full Text Display 
• Rechargeable Batteries
• No Maximum number of Pagers per System

• Easy Installation
• Complies with British Standards
• Single button Reset from alarm status
• Repeater/Booster available

• Can be powered from existing DC powered equipment on site or from mains supply.
• Supplied with aerial, plug in power adaptor & full instructions.
• Frequency selectable.
• Pager Transmit baud rates selectable.

Function meets aesthetics with the Hark Stainless Steel Disabled Toilet Alarm System, complete with pull cord, reset button and indicator.

• A single zone call controller c/w a 12V 140mA PSU.
• Optional standby battery.
• Onboard relay.
• Compatible with C-TEC's entire range of 800 Series Call System components.
• Capable of indicating standard (constant tone) and emergency (intermittent tone) calls.
• Includes a volume adjustable sounder and a link-selectable Call Accept/Reset button.