Hikvision DS-KD-ACF3/Plastic | Flush Mount Module Bracket (3-Gang) | For Modular Door Station

FAQs

What is included in the DS-KD-ACF3/Plastic mounting kit?

The DS-KD-ACF3/Plastic is a complete flush mounting solution that includes the plastic gang box (the recessed housing that mounts within the wall), the aviation aluminum cover (the visible finishing plate), mounting screws for securing both components, and module-connecting lines for interconnecting the three modules within the system. Everything required for a professional three-module flush installation is provided in the kit.

How many modules can be installed using this bracket system?

The DS-KD-ACF3/Plastic is specifically designed for three-module configurations. The gang box dimensions of 338.8mm × 134mm × 56mm are precisely sized to accommodate three standard-width modules from Hikvision’s KD8 series arranged vertically. This could include combinations such as a main door station unit plus two sub-modules (keypads, nametag panels, card readers, etc.), or other three-module arrangements according to your system requirements.

What is the difference between plastic and metal versions of this bracket?

The DS-KD-ACF3/Plastic features a lightweight plastic gang box construction, making it more affordable and easier to handle during installation compared to all-metal alternatives. However, both versions include an aviation-grade aluminum cover for professional appearance and weather protection. The plastic gang box version is suitable for most standard installations where maximum impact resistance is not the primary concern, whilst metal versions (such as DS-KD-ACF3) may be preferred for high-security applications or locations with greater vandalism risk.

Can this bracket be used for outdoor installations?

Yes, the DS-KD-ACF3/Plastic is designed for outdoor installation. It operates reliably in temperatures ranging from -40°C to 55°C and humidity levels from 10% to 95%. The aviation aluminum cover provides weather resistance, whilst the flush mounting design offers inherent protection by recessing the modules within the wall rather than leaving them exposed on the surface. However, the modules themselves must also be rated for outdoor use (such as the IP65-rated KD8 series door stations) to ensure complete system weather protection.

What door station modules are compatible with this bracket?

The DS-KD-ACF3/Plastic is compatible with Hikvision’s modular door station systems including DS-KD8003-IME1 series modules, DS-KD8003-IME1(B) modules, and DS-KD8003Y-IME2 two-wire main units. You can use various combinations of three modules including main camera units, DS-KD-KK nametag modules, DS-KD-KP keypad modules, DS-KD-DIS display modules, and DS-KD-PMR induction loop modules. The system’s modular nature allows you to customize the configuration according to specific building requirements.

What is flush mounting and why would I choose it?

Flush mounting means the door station modules are installed recessed within the wall rather than surface-mounted (protruding from the wall). This creates a sleek, integrated appearance that is more aesthetically pleasing and professional-looking. Flush mounting also provides practical benefits including better protection against accidental impacts, reduced vulnerability to vandalism attempts, and a lower profile that is less likely to interfere with door operation or traffic flow near the entrance. The trade-off is that flush mounting requires cutting an installation cavity in the wall, making it more labor-intensive than surface mounting.

How do I install the DS-KD-ACF3/Plastic bracket system?

Installation involves several steps: First, mark and cut the installation cavity in the wall according to the gang box dimensions (338.8mm × 134mm × 56mm depth). Pull the necessary cables through the gang box cable entry points. Secure the gang box within the cavity using the provided mounting hardware. Connect the module-connecting lines between the three modules according to the system wiring diagram. Insert the modules into the gang box. Finally, secure the aluminum cover over the installation using the provided cover screws. Detailed installation instructions should be followed, and professional installation is recommended for best results.

What are the dimensions of the installation cavity required?

The installation cavity (the hole cut into the wall) needs to accommodate the gang box which measures 338.8mm wide × 134mm high × 56mm deep (13.33″ × 5.31″ × 2.20″). You should allow slightly larger dimensions for easier installation and adjustment, typically adding 2-5mm to each dimension. The exact cavity size may also depend on the wall construction material and the fastening method used. Consult the detailed installation guide for precise specifications and recommendations based on your wall type.

Can I use this bracket for a two-module or single-module installation?

No, the DS-KD-ACF3/Plastic is specifically designed and sized for three-module configurations. For two-module installations, you should use the DS-KD-ACF2/Plastic bracket system. For single-module installations, specialized single-module brackets or the module’s own mounting hardware would be appropriate. Using an oversized bracket for fewer modules would result in empty space and an unprofessional appearance, and the modules may not be properly secured within the gang box.

What is the weight capacity of the plastic gang box?

While specific weight capacity limits are not published in the technical specifications, the plastic gang box is engineered to reliably support three standard Hikvision door station modules, which typically weigh between 200-400g each depending on the module type. The gang box itself weighs 420g (net), and when properly mounted within the wall cavity using the provided hardware, it provides stable long-term support for the installed modules. For installations requiring maximum load capacity or extreme durability, consider the metal gang box alternatives.

How do the module-connecting lines work?

The module-connecting lines included in the kit are pre-made cables designed to interconnect the three modules within the gang box. These lines carry power and RS-485 data signals between modules, allowing sub-modules (keypads, nametag panels, etc.) to communicate with the main door station unit. The lines have standardized connectors on each end that match the module-connecting input and output interfaces on each module, simplifying installation and ensuring reliable connections. The cable lengths are sized appropriately for three-module vertical configurations.

Is the aluminum cover paintable if I want to match building colors?

While the aviation aluminum cover can technically be painted, doing so may void warranties and affect the material’s corrosion resistance properties. The cover is designed to provide a professional appearance in its natural aluminum finish. If color customization is important for your installation, contact Hikvision or your authorized dealer to inquire about color options or alternative finishing solutions that won’t compromise the bracket’s durability and weather resistance.

Can I replace just the gang box or cover if one component is damaged?

The DS-KD-ACF3/Plastic is sold as a complete kit, and individual components may not be available separately. If a component becomes damaged, you may need to purchase a complete replacement kit. However, availability of individual components can vary by region and distributor, so contact your Hikvision supplier to inquire about replacement part availability. To prevent damage, ensure proper installation following manufacturer guidelines and use appropriate protection during construction activities near the installed system.

Does this bracket provide any weatherproofing for the modules?

The bracket system provides physical protection through its recessed mounting design and the aluminum cover helps shield against direct weather exposure. However, the primary weatherproofing must come from the modules themselves, which should be rated for outdoor use (such as IP65 or higher). The flush mounting design inherently provides better weather protection than surface mounting by recessing the modules within the wall, but proper installation with appropriate sealing around the gang box perimeter is essential to prevent water ingress behind the installation.

What tools are needed for installation?

Installation typically requires: a drill with appropriate masonry bits for cutting the installation cavity, a level for ensuring proper alignment, screwdrivers (likely Phillips head) for the mounting and cover screws, measuring tools (tape measure, pencil) for marking the cavity location, and possibly a small saw or oscillating multi-tool depending on wall construction. For masonry walls, you’ll need a hammer drill and appropriate anchors. The specific tools required may vary based on your wall material (drywall, brick, concrete, etc.) and installation method.