Evacuator FMCEVASYNP15 | Synergy+ TG Wireless Site Alarm | Call Point, First Aid, Sounder & Strobe
£260.00 (inc VAT: £312.00)
Summary
The Evacuator Synergy+ TG represents advanced wireless fire alarm technology specifically engineered for construction sites, temporary installations and harsh outdoor environments. This EN54-certified unit combines a manual call point, 101dB sounder and visual strobe into a compact, weatherproof package that delivers professional-grade protection without the complexity or cost of traditional wired systems.
Built around Evacuator’s proprietary Infinity S2 wireless chip, the Synergy+ TG operates within intelligent mesh networks of up to 250 devices, ensuring redundant communication paths that maintain system integrity even if individual units are damaged. The IP65-rated enclosure features UV-resistant ABS construction and silicone rubber sealing, providing exceptional durability in exposed locations where weather protection is critical.
With a 3-year battery life and completely wire-free operation, the Synergy+ TG eliminates installation time and ongoing maintenance costs associated with cabled systems. The anti-tamper antenna and tamper-proof fixings prevent unauthorized interference, while the device’s addressability allows triggered units to be quickly identified from base stations or other call points. This combination of robust construction, wireless flexibility and certified performance makes the Synergy+ TG ideal for evolving sites where traditional fire alarm infrastructure is impractical or cost-prohibitive.
Features
- EN54-certified manual call point (MCP) with integrated sounder and strobe for compliance with European fire alarm standards
- IP65 ingress protection rating providing comprehensive dust sealing and protection against water jets from any direction
- UV-resistant ABS housing construction ensuring long-term durability and color stability in outdoor installations
- 101dB sound output at 1 meter providing effective audible alarm coverage across construction sites
- Wireless mesh network technology supporting up to 250 interlinked devices with secure encrypted communication
- 3-year battery life from included BATTERYPACK4 reducing replacement frequency and lifetime operating costs
- Infinity S2 wireless chip providing enhanced range (up to 2km line of sight) and Category 1 receiver grade performance
- Multiple communication routes through mesh network ensuring alarm transmission even if individual devices are damaged or removed
- Anti-tamper antenna for secure wireless communication resistant to interference and unauthorized access
- Silicone rubber enclosure seal enhancing weatherproofing beyond standard IP65 requirements
- Tamper-proof fixings preventing unauthorized removal or tampering with installed units
- Tamper mode alerting system administrators to attempted interference with device operation
- Addressable functionality allowing identification of specific triggered units from base stations or other devices
- System-wide reset capability from call point itself or connected base station
- Hinged call point cover preventing accidental activation while ensuring emergency access
- Integrated visual strobe providing high-visibility warnings in noisy environments where audible alarms may be insufficient
- Compatible with Synergy+ base stations, sounder strobes, smoke detectors, heat detectors and relay interfaces
- Simple pairing process with large buttons for straightforward setup without specialized tools or software
- Compact dimensions (310mm H x 165mm W x 140mm D) suitable for installation in confined spaces
- Included call point reset key for authorized system reset without replacement components
FAQs
What is the maximum number of devices that can be connected in a Synergy+ TG system?
The Synergy+ TG supports wireless interlinking of up to 250 mixed devices including call points, sounder strobes, smoke detectors, heat detectors, base stations and relay interfaces. This represents a 144.82% increase in capacity compared to previous Synergy RF systems which supported only 40 devices, making the TG range suitable for much larger construction sites and temporary installations requiring extensive coverage.
How does the wireless mesh network protect against system failure?
The Synergy+ TG uses an intelligent mesh network where each device maintains multiple communication routes to other units within range. The Infinity S2 chip constantly updates device statuses and measures distances, planning the fastest alarm transmission path through the network. If any device is damaged, disconnected or experiences low battery, the alarm signal automatically routes through alternative paths, eliminating single points of failure and ensuring reliable operation even in demanding construction environments.
What battery life can be expected and what battery does the unit use?
Under normal operating conditions, the Synergy+ TG achieves approximately 3 years of battery life from the included BATTERYPACK4, significantly reducing replacement frequency and maintenance costs compared to earlier wireless site alarm systems. The extended battery life results from the power-efficient Infinity S2 wireless chip design which balances high performance communication with minimal power consumption. Battery status is monitored by the system and low battery warnings are displayed on connected base stations.
Is the Synergy+ TG compatible with older Synergy RF products?
No, the Synergy+ range (identified by red housing) operates on a different wireless protocol and is not compatible with the previous Synergy RF range (white housing). The newer Synergy+ system uses the Infinity S2 chip operating at 869MHz with enhanced range, capacity and security features. Sites upgrading from Synergy RF to Synergy+ will need to replace all wireless devices, though the improved specifications including 250-device capacity, 2km range and 3-year battery life provide significant operational advantages.
What certifications and standards does the Synergy+ TG comply with?
The Synergy+ TG is EN54-certified for both the manual call point (MCP) component and the sounder strobe alarm devices, ensuring compliance with European fire detection and alarm system standards. The system features Category 1 receiver classification, the highest grade available for wireless communication reliability. The IP65 rating meets international standards for protection against dust ingress and water jets, making the unit suitable for outdoor installations where weather exposure is a concern.
How is the system reset after an alarm has been triggered?
The Synergy+ TG offers multiple reset options for operational flexibility. Individual units can be reset using the included call point reset key by swiping over the reset patch on the device. Alternatively, if a Synergy+ base station is installed in the system, the entire network can be reset from the base station’s touchscreen interface, eliminating the need to physically access each triggered call point. This system-wide reset capability significantly reduces the time required to restore normal operation after alarm testing or actual emergencies.
Can the Synergy+ TG be used in extreme weather conditions?
Yes, the Synergy+ TG is specifically designed for harsh and exposed environments. The IP65 rating provides protection against dust ingress and high-pressure water jets from any angle, while the UV-resistant ABS housing prevents degradation and discoloration from prolonged sun exposure. The silicone rubber enclosure seal provides additional weatherproofing beyond standard IP65 specifications. The unit operates reliably in construction site conditions including rain, dust, temperature variations and direct sunlight, making it suitable for outdoor installations throughout the year.
Specifications
- Product Code: FMCEVASYNP15
- Certification: EN54-certified manual call point and sounder strobe
- IP Rating: IP65 (dust tight and protected against water jets)
- Housing Material: UV-resistant ABS
- Sound Output: 101dB at 1 meter
- Visual Alarm: Integrated LED strobe light
- Wireless Technology: Infinity S2 chip with mesh network capability
- Wireless Range: Up to 2km line of sight transmission
- Operating Frequency: 869MHz
- Receiver Grade: Category 1 (highest wireless reliability classification)
- Network Capacity: Up to 250 interlinked devices
- Communication Encryption: Fully encrypted wireless transmission
- Power Supply: BATTERYPACK4 (included)
- Battery Life: Up to 3 years under normal operating conditions
- Dimensions: H 310mm x W 165mm x D 140mm
- Weight: 1.9kg
- Sealing: Silicone rubber enclosure seal
- Antenna: Anti-tamper design for secure wireless communication
- Fixings: Tamper-proof mounting hardware
- Tamper Detection: Tamper mode alerts for unauthorized access attempts
- Reset Method: Call point reset key (included) or base station control
- Call Point Type: Hinged cover manual activation
- Addressability: Device identification via base station or network
- Included Accessories: BATTERYPACK4, call point reset key
- Compatibility: Synergy+ range devices only (not compatible with Synergy RF)
- Application: Construction sites, temporary installations, outdoor events, harsh environments
Downloads
- Datasheet (Adobe PDF)
Additional information
| Weight | 1 kg |
|---|---|
| Protocol | |
| Device Type | |
| First Aid | |
| Power |
