Types of Smoke Detector Testing
Broadly speaking, there are two types of tests you can do to check that your smoke detector is functioning properly. Functional Testing is achieved by exposing the sensor in the detector to a source of smoke. Smoke detector testers can be used to produce simulated smoke safely and easily. This method is also known as […]
Fike Acquires Rafiki Protection Ltd
Rafiki Protection, the manufacturer of the Twinflex fire alarm system has been acquired by American based Fike. Fike is a globally recognised supplier of products and services that protect people and critical assets from dangers such as fire, explosion and over-pressurisation. With over 60 years experience manufacturing products ranging from rupture discs and explosion protection […]
Solo Detector Testers now available
Solo detector testers provide a range of products for Smoke Testing, Heat Testing, CO Testing, Detector Removal & Cleaning, Access Poles and Testing Kits. Fire detector test and service equipment must be safe both for engineer and system. At the very least it must comply with international codes & standards, be approved and/or endorsed by […]
Rafiki Twinflex Price Watch
To ensure that we offer our customers the best available prices for the complete range of Rafiki Twinflex fire alarm equipment we are now reviewing the prices of the leading on-line fire alarm retailers and price matching the lowest possible price for each product on a daily basis. This now means you do not have […]
Rafiki Twinflex Multipoint ASD Detector Multi-Criteria Detector
The “Multipoint” detector has set new standards in detector technology, using microprocessor control, offering the installer a full range of detection capabilities with audible and visual warning in one compact device. Specifiers and installers who choose the Multipoint detector, do so secure in the knowledge that the fire detection performance of the detector can be […]
Rafiki Twinflex Multipoint ASD Detector Automatic Calibration
To ensure the detection capabilities of the Multipoint are never compromised it self-calibrates every 6 hours. It continuously monitors for dust contamination, until, over a period of time, depending on the environment, it reaches a point where the chamber becomes saturated. Before this can develop into a false alarm situation, the panel will indicate that […]
Introduction to Fire Alarm Systems
Fire alarm systems are used to detect a fire, and to signal a warning alarm to the appropriate source. In general, there are 3 types of system; Manual Fire Alarm Systems – which relies on manual call points to signal an alarm Life Protection Fire Alarm Systems – these are designed to protect the occupants […]
Rafiki Twinflex Multipoint ASD Detector Stealth Chamber
The method of optical scatter fire detection is well known. Sensors comprise an optical emitter and a receiver positioned in a sensing chamber. The emitter and receiver are positioned such that there is no line of site between them, although some light from the emitter does reflect on the walls of the chamber and into […]
Rafiki Twinflex Multipoint ASD Detector available shortly
Building upon the popular Twinflex Multipoint Detectors, Rafiki have launched a new Multipoint ASD Detector range which offers the following principle features. Three smoke detectors Three heat detectors Combined smoke/heat detector Full alarm sounder Strobe End-of-line device/loop isolator In addition the new ASD Detectors benefit from a new ‘Stealth’ Optical Chamber Design, Multi-Criteria Detection and […]