Zeta Alarms

• Sandwich design between base and detector
• 16 selectable international alarm tones
• Individual or group triggering capability

• Indoor MKII addressable sounder compatible with Zeta control panels
• 102dB @ 1m sound output
• Available in Red or White

• Combined sounder and VAD in single unit
• 100dB sound output at 1 metre
• Hard or soft addressable capability

• IP65 weatherproof sounder
• 16 Tone patterns (site selectable)
• Available in red or white

• IP65 weatherproof sounder/beacon
• Flashing rate 0.33Hz - 1.5Hz
• Available in red or white

• Replacement controls enabled keyswitch.
• Compatible with Simplicity, Quatro & Premier SX panels.
• Supplied with pair of keys.

• Complies with EN54 Pt 3 Type B & EN54 Pt 23.
• 107dB +/- 3dB @ 1m sound output.
• 22 Tone patterns (site selectable).
• Suitable for surface mounting only.
• Housed in UL V0 flame retardant ABS.
• 3 x 20mm cable entries (2 top, 1 bottom).
• First fix, wire to back box technology.
• IP65 Rating.
• Flashing rate 0.5Hz

• Complies with EN54 Part 3 Type B.
• 107dB +/- 3dB @ 1m sound output.
• 22 Tone patterns (site selectable).
• Suitable for surface mounting only.
• Housed in UL V0 flame retardant ABS.
• 3 x 20mm cable entries (2 top, 1 bottom).
• First fix, wire to back box technology.
• IP65 Rating.

• Complete disabled toilet alarm system for 1, 2, 3 or 4 toilets/areas
• 4 zone controller supplied with all versions allowing for future expansion
• Controller can be powered by either 12V DC or 240V AC

• Designed to meet the requirements of BS8300
• 1-4 zone capability (1 zone per disabled toilet)
• Simple 3 wire operation for all field devices
• Zone LED indication
• System silence & reset options

• Designed to meet the requirements of BS8300
• Ceiling mounted pull cord used to generate an alarm activation
• 2.4m cord length

• Designed to meet the requirements of BS8300
• Wall mounted device which during an alarm activation will give an visual & audible
  alert
• Can be installed on other toilet alarm systems

• Designed to meet the requirements of BS8300
• Wall mounted push button which is pressed to cancel an alarm activation
• Can be installed on other toilet alarm systems

Spare Disabled Toilet Alarm Pull Cord & Handles

Disabled Toiler Sticker

• Compliant mains safety isolator keyswitch for fire alarm systems.
• Meets the reuirements of BS 5839 Pt.1 2013.
• Double pole isolation (both live & neutral supply is switched).

• BS5839 part 9 (2011) compliant
• Integral 24Vdc power supply 2 Amp
• LCD Display
• 7 status LEDs
• Fault & alarm relay output

Enter a brief description of your product here. This description will be displayed on product list pages.

Enter a brief description of your product here. This description will be displayed on product list pages.

• Safely isolate mains supply
• Ensures mains supply is only isolated by authorised persons with key
• Meets BS 5839 Part1 2002
• Available in Red or White

• Bezel to flush mount Zeta CP3 call point
• Compatable with ZT-CP3. ZT-CP3/AD or ID2-MCP

• Rate of rise and fixed heat detection at 57°C
• Twin LEDs for enhanced alarm indication
• DIFT approved, EN54 parts 5 & 7 compliant

The Fyreye common base is used on systems that don't need to keep line integrity on head removal, and also on addressable systems.

Deep back box suitable for surface mount cable termination of cables with trunking, conduit or glands.