Sounder/VAD
Showing all 10 results
-
C-Tec ActiV Conventional Base Sounder VAD (C-3-8.5)
- Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs)
- Provides 'C-3-8.5' light distribution (min 0.4 lux over a 3 x 8.5m cylindrical area)
- Impressive 96dB(A) sound output @ 1m
- Includes 31 selectable primary tones and an optional secondary tone
- Two volume levels (high and low)
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
- Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use
- Supplied with a BF431QCP quick connect plate and detector spur wires
- IP21C rated
-
Conventional Raptor Sounder Beacon White Flasher
- Complies with EN54 Pt 3 Type B & EN54 Pt 23.
- 107dB +/- 3dB @ 1m sound output.
- 22 Tone patterns (site selectable).
- Suitable for surface mounting only.
- Housed in UL V0 flame retardant ABS.
- 3 x 20mm cable entries (2 top, 1 bottom).
- First fix, wire to back box technology.
- IP65 Rating.
- Flashing rate 0.5Hz
-
Conventional Symphoni LX Wall Sounder Beacons
- Ultra low current consumption.
- Up to 7.5m coverage volume (switchable to 2.5m).
- Coverage switch to 2.5m.
- Available as weatherproof (IP66) version.
-
Eaton Base Sounder VAD
- Certified to latest standard EN 54-23
- First fix base
- Fixing platform for most popular detectors
- Tamper proof cap for standalone use (supplied separately)
- For use with or without a detector
-
Fulleon RoLP LX Roshni Wall Sounder Flasher – Red
- Ultra Low Current Consumption
- Up to 7.5M Coverage
- Switchable Flash Rate
- IP65 Protected
-
Nexus Pulse EN Certified High Output Sounder & VAD Beacon
- High output of 105 or 110dB (depeding upon version)
- Conforms to EN54-23
- White or Red flash versions available
- Synchronised Flash
-
Sonos Pulse Ceiling Mounted EN Certified VAD Beacon With Optional Sounder
- Ceiling mounted Visual Alarm Device
- Conforms to EN54-23
- White or Red flash versions available
- Available with optional Sounder
- Synchronised Flash
-
Sonos Pulse Wall Mounted VAD Beacon with Sounder
- EN54-23 VAD
- White or Red flash versions available
- Includes integral sounder
-
System Sensor DSS-PC-N00 & I00 Addressable Base Sounder & VAD with Optional Isolator
- High output LED technology ensures optimum light output and low power requirements.
- High efficiency piezo disk and horn profile generate powerful sound output.
- Features Advanced protocol controllable sound output, tone selection, group polling, independent sound or strobe function
- Automatic synchronization of sounder and strobe
- Large cable access
- Rear or surface cable entry
- Loop continuity spring
- Simple twist fit onto universal B501AP base (positive “poke yoke” engagement)
- Anti-tamper feature
- In-built isolation options
- Address tag for clear indication
- Single point of installation – saves time, cost & inventory
- Low current draw enables more devices on loop
- Adjustable volume control (on device or from panel)
- Rotary wheels for clear address indication
- Clear lens with red flash
-
Xtratone Conventional Combined Wall Sounder Beacon
- Complies with EN54 Part 3 Type A
- 102dB @ 1m sound output
- 22 Tone patterns (site selectable)
- Flush or surface fixing
- Housed in UL V0 flame retardant ABS
- 4 x 20mm cable entries (2 top, 2 bottom)
- First fix, wire to back box technology
- Flashing Rate 0.5Hz