Conventional Fire Alarm Systems
Showing all 37 results
-
Infinity 2, 4 or 8 Zone Conventional Fire Alarm Kit
- Conventional fire alarm kit with 2, 4 or 8 zone panel
- Kit can be expanded with additional devices
- Additional saving by buying in kit format
-
C-Tec CFP 2, 4 or 8 Zone Conventional Fire Panel
- 2, 4 or 8 zone circuits
- Economy version available
- Four conventional sounder circuits
-
Infinity8 Conventional Fire Alarm Panel
- Optional 24V aux supply (4-8 zone versions only)
- Optional non-latching zone
- Fault relay can be configured as 2nd fire relay
-
Kentec Sigma CP Conventional 2, 4 or 8 Zone Panel
- Fully certified to BS EN54-2 and BS EN54-4
- 2, 4 or 8 version zones
- Surface and Flush Mounting Options
-
Eaton Flexi BiWire or Conventional Panel
- Configure zone wiring to work as either a conventional or two-wire system
- Allows the connection of an existing conventional system to a BiWire system
- Compatible with two-wire and conventional EN 54-23 certi ed visual alarm devices (VADs)
-
-
Gent Xenex Conventional Panel
- 2, 4 or 8 zone conventional panel from Gent
- Up to 8 conventional sounder circuits
- One-man test and commissioning features
-
Esento Eclipse Conventional or Save-Wire Panel
- 2 or 4 zones
- False alarm management
- Twin Wire selection
-
Haes Esento Excel Sav-Wire or Conventional Panel
- 2-12 zones
- Individually selectable Twin Wire zones
- Network up to 8 control panels
-
Apollo Series 65 Optical Smoke Detector
- Responds to slow fires
- Suitable for bedrooms
- Unaffected by wind
-
Apollo Series 65 Conventional Heat Detector
- Series 65 conventional heat detector.
- Choice of 4 heat classes.
- Ideal for environments that are dirty or smoky under normal circumstances.
-
Fyreye MKII Conventional Optical Smoke Detector
- Conventional optical smoke detector
- Compatible with most conventional systems
- 8 alarm indication LEDs
-
Fyreye MKII Conventional Rate of Rise and Fixed Heat Detector
- Conventional heat detector wirth Rate of Rise or Fixed Heat trigger @ 57 °C
- Compatible with most conventional systems
- 8 alarm indication LEDs
-
Fyreye MKII Conventional Fixed Heat Detector
- Conventional fixed high-temperature heat detector
- Compatible with most conventional systems
- 8 alarm indication LEDs
-
Fyreye MKII Conventional Fyreye Fixed Heat (CS) Detector
- Designed to meet EN54 requirement
- Lockable to base to stop unauthorised removal
- Remote LED output
-
Hochiki CDX Conventional Smoke Detector
- Removable high performance chamber
- Automatic sensitivity window verification
- Approved by LPCB and VdS
-
Hochiki CDX Conventional Combined 60 Degree Heat Detector
- Electronic linear heat detection
- Twin fire LEDs allow 360° viewing
- Approved by LPCB & VdS
-
Hochiki CDX Conventional Fixed 60 Degree Heat Detector
- Electronic linear heat detection
- Twin fire LEDs for 360° viewing
- Wide voltage range of 9.5 to 30 V DC
-
Hochiki CDX Conventional Combined 90 Degree Heat Detector
- Electronic linear heat detection
- Incorporates a 90°C fixed temperature element
- Approved by LPCB & VdS
-
Hochiki CDX Conventional Fixed 90 Degree Heat Detector
- Electronic linear heat detection
- Remote indicator output
- Wide voltage range (9.5 to 30 V DC)
-
Hochiki Conventional Weatherproof 60 Degree Heat Detector in Ivory
- Waterproof design - rated to IP67
- Low profile shape
- Utilises a bi-metallic strip to sense temperature change
- No mounting base required
- No standby current
- Approved by LPCB & VdS
-
Eaton Conventional Enhanced Optical Smoke Detector
- Low profile design
- 360° viewable LED design
- Removable detector chamber for cleaning
-
Eaton Conventional Heat Detector
- Rate of rise, fixed at 77°C or fixed at 92°C models available.
- 360° visibility LED using lightpipe technology.
- Aesthetically pleasing.
- Quick and simple to install.
-
Eaton FXN922 Selectable Multi-Mode Conventional Detector
- 5 modes in 1 detector
- Chamber monitoring and drift compensation dual LED
- ‘Self-Check’ facility
-
Nittan EVC-P Evolution Conventional Optical Detector
- Optical smoken detector from Nittan.
- Omniview 360° LED.
- Internal alarm current limiting resistor.
- Wide operational voltage range (12v-32v).
-
Nittan Evolution Conventional Heat Detector
- 62°C or 92°C conventional heat detector from Nittan.
- Omniview 360° LED.
- Internal alarm current limiting resistor.
- Wide operational voltage range (12v-32v).
-
Nittan EVC-DP Evolution Conventional Dual Optical Detector
- Dual Optical Detector Reduces False Alarms.
- Omniview 360° LED.
- Internal Alarm Current Limiting Resistor.
- Wide Operational Voltage Range (16v-32v).
-
ActiV Conventional Optical Smoke Detector
- High-quality optical smoke detector
- Drift compensation functionality
-
ActiV Conventional Heat Smoke Detector
- Heat Class A1r, A2 & B
- Third-party certified to EN54-5 by Intertek
- Carries the pan-European ‘CertAlarm’ mark
-
ActiV Conventional Multi-Sensor Fire Detector
- Optical + heat multi-sensor
- Drift compensation functionality
-
Kidde Commercial Conventional Optical Smoke Detector
- Programmable smoke sensitivity levels for tailored detection
- Self-diagnostic capabilities for enhanced reliability
- All-round LED visibility for easy status monitoring
-
Kidde Commercial Conventional Heat Detector
- Self-diagnostic capabilities for enhanced reliability
- All-round LED visibility with a 360° viewing angle
- Three programmable operating levels for versatile applications
-
Kidde Commercial Conventional Multisensor Detector
- Integrated photoelectric and heat detection technology
- Programmable smoke sensitivity levels for enhanced adaptability
- All-round LED visibility for easy status indication
-
CXL Universal Call Point
- Choice of Glass or Plastic Elements
- Changeover Contacts
- 470/680 Ohm Resistors
-
KAC Conventional Indoor Manual Call Point
- Unique ‘Plug & Play’ installation concept
- Total ‘Flex-Ability’ in the choice of operating element
-
Zeta CP4 Conventional Manual Call Point
- Very high visibility of the alarm condition
- High impact resistant ABS glass fiber material Fully patented
- Quick and easy installation
-
Roshni Low Profile (RoLP) Conventional Fire Alarm Sounder
- 102dB(A) sound output
- 32 tones (user selectable)
- Optional deep base
- Two stage alarm
- Automatic synchronisation