VAD
Showing 51–77 of 77 results
-
SmartNet White Ceiling VAD in Red
- Visual alarm device (VAD) certified to EN 54-23 and EN 54-25
- Ceiling mount configuration - Beacon Type C-3-9
- Addressable through the SmartNet configuration tool
-
SmartNet White Ceiling VAD in White
- Visual alarm device (VAD) certified to EN 54-23 and EN 54-25
- Ceiling mount configuration - Beacon type C-3-9
- Addressable through the SmartNet configuration tool
-
SmartNet White Wall VAD in Red
- Visual alarm device (VAD) certified to EN 54-23 and EN 54-25
- Wall mount configuration - Beacon Type W2.4-7
- Addressable through the SmartNet configuration tool
-
SmartNet White Wall VAD in White
- Visual alarm device (VAD) certified to EN 54-23 and EN 54-25
- Wall mount configuration - Beacon Type W 2 .4 -7
- Addressable through the SmartNet configuration tool
-
Eaton BiWire Ultra Base Sounder with Optional VAD Flasher
- Available with Optional VAD Flahser
- Certified to EN54-3 & EN54-23
- Can be Used Stand Alone
- For Use with 5-1 muli-sensor Detector
-
Eaton BiWire Ultra Wall Sounder & VAD
- Certified to EN54-3 and EN54-23
- High sound output with durable design
- Weatherproof option available
-
Eaton BiWire Ultra Weatherproof Wall Sounder & Optional VAD
- Certified to EN054-3
- Weatherproof
- 3 Selectable Tones
-
Ekho Wireless Optical Smoke Sensor with Voice & VAD
- Built in Voice Alarm and VAD
- Up to 10 years battery life
-
EMS FireCell Wall Mounted VAD Head
- FireCell EN54-23 VAD head only
- Requires FireCell base for notification devices
- 0.5 Hz / 1 Hz beacon flash selection
-
EMS FireCell Ceiling Mounted VAD Head
- Ceiling rated VAD head only
- W-3.1-11.3 / 396 m3 EN54-23 coverage
- Requires FireCell base for notification devices
-
-
EMS FireCell Ceiling Sounder & VAD Head
- Dual band 868MHz operation for enhanced wireless performance
- 32 selectable tones, allowing customisation for various signalling needs
- Integrated audio monitoring, volume control, and anti-tamper locking mechanism for added security
-
EMS FireCell Wireless Base for Notification Devices
- Base for FireCell notification devices (sounder/beacon heads)
- Dual band 868MHz operation
- Integrated audio monitoring
-
Hochiki YBO-BSB2 ESP Addressable Base Sounder Beacon
- Hochiki ESP combined base sounder & VAD beacon.
- Variable Sound Output 50 ~ 98 dB(A) output at 1 metre.
- 'O' Rated Beacon to EN54-23.
- Available with Red or White LEDs.
- Available with White or Ivory case.
-
Hochiki CHQ-WSB2 ESP Addressable Wall Sounder Beacon in Red or White
- Single Loop Address - addressed via the TCH-B200 Hand Held Programmer.
- Variable Sound Output 90 ~ 102 dB(A) (±2 dB(A)) output at 1 metre.
- Sounder and Beacon can operated independently*1.
- ‘O’ Rated Beacon to EN54-23.
- Available with Red or White LEDs.
- Available with Red or White case.
- Weatherproof Kit available.
-
Hochiki CHQ-WB Addressable Loop Powered Wall Beacon VAD
- Wall mouted certified VAD.
- Loop powered.
- Choice of 2 LED colours (red or white).
- Choice of 3 case colours (white, ivory or red).
-
Hochiki CHQ-CB Addressable Loop Powered Ceiling VAD
- Ceiling mouted certified VAD.
- Loop powered.
- Choice of 2 LED colours (red or white).
- Choice of 3 case colours (white, ivory or red).
-
-
Nittan Evolution High Output Beacon
- High output beacon
- IP65 waterproof rating
- Integral short circuit isolator
-
Nittan Evolution High Output Sounder Beacon
- High output sounder beacon
- IP65 waterproof rating
- Integral short circuit isolator
-
SmartCell Wireless Dual Smoke & Heat Detector with Sounder & Beacon VAD
- Flexible detection; smoke and/or heat
- Integral sounder (32 tones) & beacon VAD (part 23)
- Unique design
- Inbuilt locking mechanism
-
Solista LX – Wall Fire Visual Alarm Device (VAD)
- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.
-
Solista LX Conventional Ceiling Mounted VAD
- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.
-
Sonos Pulse Ceiling Mounted EN Certified VAD Beacon With Optional Sounder
- Ceiling mounted Visual Alarm Device
- Conforms to EN54-23
- White or Red flash versions available
- Available with optional Sounder
- Synchronised Flash
-
Sonos Pulse Wall Mounted VAD
- EN54-23 VAD
- White or Red flash versions available
- Synchronised Flash
-
StroBell Combined Fire Alarm Bell With White LED Beacon
- Utilises market-leading bell design
- Ultra bright strobe in clear lens for maximum light output
- Single point of installation minimises wiring and associated costs
-
XP95 Category W EN 54-23 Visual Alarm Device with Red or White Body
- Uses high intensity LED (white flash only).
- EN 54-23 Compliant Category W. VAD.
- Coverage W-2.4-6.
- Automatic LED check when VAD activated.