No
Showing 301–350 of 363 results
-
Nittan Sensortec Addressable Optical Detector
- Optical smoke detector for Nittan Sensortec systems.
- Latest generation Nittan optical chamber.
- Omniview 360° LED.
- Robust fully modulated AS communications protocol.
-
Nittan UB-4 Standard Detector Base
- Nittan 4 Terminal Standard Detector Base.
- Low Profile Detector Base.
-
Notifier NFXI-OPT Opal Addressable Smoke Detector
- Built in short circuit isolation.
- New advanced Opal protocol allows mapping of the loop for precise fault location using isolators.
- Tri colour LED offering red, green and amber colours.
- Rotary decade address switches.
-
Notifier OPAL NFXI Thermal Heat Addressable Detector
- Advanced thermal sensing
- Fixed temperature and rate of rise versions available
- Short circuit isolation
- Panel controllable
-
Apollo Orbis Conventional Heat Detector
- Wide range of heat detector classes for various conditions
- Rate-of-rise and static temperature detection capabilities
- Open-web casing for improved air flow and temperature measurement
-
Orbis Intrinsically Safe (IS) TimeSaver Base
- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Continuity link for zone testing
- Detector locking mechanism
-
Apollo Orbis Conventional Multisensor Detector
- Responds well to fast-burning, flaming fires
- Transient rejection algorithms reduce false alarms
- Automatic drift compensation with DirtAlert™
-
Apollo Orbis TimeSaver Continuity Switch Base
- Facilitates continuity testing for enhanced reliability
- Quick and efficient installation process
- Compatible with Orbis fire detection systems
-
Rotary Fire Alarm Bell
Rotary Fire Alarm Bell
With a tried and tested robust design, this hand operated fire bell is suitable for use in hazardous locations or areas without a power supply. The bell has a pre-drilled flange for easy fitting, an aluminium base plate and red dome.
- Suitable for internal and external use
- Sound output: 60dB at up to 35m
- Quick and simple to install
-
-
Solista LX – Wall Fire Visual Alarm Device (VAD)
- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.
-
Solista LX Conventional Ceiling Mounted VAD
- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.
-
Sonos Conventional Sounder & LED Beacon
- Low current LED beacon.
- Simple ‘First Fix’ installation.
- Weatherproof to IP65 (deep base units).
- Choice of lens colours.
- Sounder and beacon can be controlled separately.
- Tone and volume can be preset or adjusted off-base - 20dB.
- Separate connections for sounder & beacon.
-
Sonos Conventional Sounder in Red or White
- Wide voltage range.
- Simple ‘First Fix’ installation.
- 32 tones.
- Tone and volume can be preset or adjusted off-base.
- Weatherproof to IP65 (deep base units).
- Synchronised alarm tones.
- Volume control - 20dB.
-
Sonos High Power 5J Xenon Beacon
- High output 5J xenon beacon
- 10-60V DC or 110/230V AC
- Simple ‘First Fix’ installation
-
Sonos LED Beacon
- High efficiency LED beacon consumes less than 5mA.
- Simple ‘First Fix’ installation (no second fix wiring).
- Weatherproof to IP65 (deep base units).
- Synchronised flash.
-
Sonos Open Area Beacon with Isolator
- For use with XP95 & Discovery systems
- Self-test fault monitoring
- IP65 rated
- Individual and group addressing
- Sycronisation of flashes
- Comes with Isolating Base as standard
- Loop-powered
- Red and clear lens options
-
Sonos Pulse Ceiling Mounted EN Certified VAD Beacon With Optional Sounder
- Ceiling mounted Visual Alarm Device
- Conforms to EN54-23
- White or Red flash versions available
- Available with optional Sounder
- Synchronised Flash
-
Sonos Pulse Wall Mounted VAD
- EN54-23 VAD
- White or Red flash versions available
- Synchronised Flash
-
Sonos Pulse Wall Mounted VAD Beacon with Sounder
- EN54-23 VAD
- White or Red flash versions available
- Includes integral sounder
-
Soteria SA5000-400 Heat Detector
- Soteria heat detectors with heat clasifications A1R, A2R, A2S, BR, BS, CR or CS.
- Simple installation with a new easy-fit base and an isolator located in the head.
- PureLight® technology.
- A sleek and stylish low-profile or flush design.
- Compatible with XP95 & Discovery protocols.
- Comprehensively tested to exceed EN54 standards.
- Extensively tested at Apollo’s state of the art in-house testing facilities.
-
Apollo Soteria Dimension Optical Smoke Detector
- Low profile design
- Utilises digital CoreProtocol communications
- Compatible with Discovery and XP95 systems*
- Integrated switchable isolator as standard
-
Soteria SA5000-600 Optical Smoke Detector
- Enhanced reliability of smoke detection.
- Reduction in false alarms.
- Simple installation with a new easy-fit base and an isolator located in the head.
- PureLight® technology.
- A sleek and stylish low-profile or flush design.
- Compatible with XP95 & Discovery protocols.
- Comprehensively tested to exceed EN54 standards.
- Extensively tested at Apollo’s state of the art in-house testing facilities.
-
StroBell Combined Fire Alarm Bell With White LED Beacon
- Utilises market-leading bell design
- Ultra bright strobe in clear lens for maximum light output
- Single point of installation minimises wiring and associated costs
-
Syrex Intrinsically Safe Sounder Beacon
- Sounder Only, Beacon Only and Sounder Beacon Options Available
- Rated for Category 1
- Choice of Lens Options
- Weatherproof to IP65
-
System Sensor 22051TE-26 Low Profile Addressable Multi-Sensor
- System Sensor two sensor multi-criteria fire detector incorporating photoelectric and thermal sensing elements.
- New mechanical platform with revolutionary chamber.
-
System Sensor Smoke, Thermal & IR Multi-Criteria Addressable Smoke Detector
- Incorporates photoelectric, thermal, and IR sensing elements for comprehensive fire detection
- Utilises the Series 200 Advanced Protocol, which supports enhanced control and configurability
- Features red, green, and amber LEDs to provide clear and distinct visual status indications
-
System Sensor 52051 Low Profile Addressable Heat Sensor
- Low profile System Sensor addressable heat detector.
- 58°C fixed temperature and rate of rise (Class A1R), 58°C fixed (Class A1S) and 78°C fixed (Class BS) available.
-
System Sensor Addressable Indoor Manual Call Point
- Addressable System Sensor MCP
- Suitable for indoor applications
- Resettable element
- No short-circuit isolator
-
System Sensor Addressable Mounting Base with Isolator
- Low profile (26mm)
- Low Current consumption (100 µA)
- Up to 99 isolators per loop
-
System Sensor B501AP Addressable Mounting Base
- System Sensor addressble sensor base with SEMS screw connections and address identification label.
-
System Sensor BSO-PP-N00 & I00 Addressable Base Sounder with Optional Isolator
- Addressable base sounder for System Sensor protocol.
- Available with optional short-circuit isolator.
-
System Sensor DSS-PC-N00 & I00 Addressable Base Sounder & VAD with Optional Isolator
- High output LED technology ensures optimum light output and low power requirements.
- High efficiency piezo disk and horn profile generate powerful sound output.
- Features Advanced protocol controllable sound output, tone selection, group polling, independent sound or strobe function
- Automatic synchronization of sounder and strobe
- Large cable access
- Rear or surface cable entry
- Loop continuity spring
- Simple twist fit onto universal B501AP base (positive “poke yoke” engagement)
- Anti-tamper feature
- In-built isolation options
- Address tag for clear indication
- Single point of installation – saves time, cost & inventory
- Low current draw enables more devices on loop
- Adjustable volume control (on device or from panel)
- Rotary wheels for clear address indication
- Clear lens with red flash
-
System Sensor Low Profile Addressable Optical Smoke Sensor
- Low profile System Sensor optical smoke detector.
- Revolutionary chamber offering improved false alarm immunity.
-
Vimpex Identifire IDBTS Base Sounder with Cover
- Slimmest profile in the industry
- 32 user-selectable tones
- EN 54-3 tested and fully approved
-
VXB & VTB Conventional Visual Alarm Device with Optional Sounder
- Approved to EN54-3(Sounder) and EN54-23(VAD Beacon).
- White flash(C-2.4-8), red flash (C-2.4-7) options available.
- 32 selectable tones.
- Body colour options available – red or white.
- Deep base variants independently certified to IP65.
-
XP95 Category W EN 54-23 Visual Alarm Device with Red or White Body
- Uses high intensity LED (white flash only).
- EN 54-23 Compliant Category W. VAD.
- Coverage W-2.4-6.
- Automatic LED check when VAD activated.
-
Apollo XPERT 8 Intelligent Mounting Base
- Compatible with Soteria, Discovery and XP95 detectors
- Isolated and non-isolated devices supported
- ‘E-Z Fit’ allows for simple mounting of the detector base
-
Xtratone Conventional Combined Wall Sounder Beacon
- Complies with EN54 Part 3 Type A
- 102dB @ 1m sound output
- 22 Tone patterns (site selectable)
- Flush or surface fixing
- Housed in UL V0 flame retardant ABS
- 4 x 20mm cable entries (2 top, 2 bottom)
- First fix, wire to back box technology
- Flashing Rate 0.5Hz
-
YBN-R/3 Hochiki ESP Sensor Mounting Base in Ivory, White or Black
- Common mounting base for Hochiki ESP range of detectors
- Available in Ivory, White or Black
-
YBO-R/3 Hochiki ESP Sounder Mounting Base
- Hochiki ESP sounder base
- Available in Red or White
-
YBO-R/SCI Hochiki ESP Short Circuit Sounder Mounting Base in Red or White
- Features short circuit isolator
- Designed for use with Hochiki ESP CHQ-WS2 and CHQ-WSB sounders
- Available in Red or White
-
Zeta CP3 Addressable Manual Call Point
- Available in both indoor & ourdoor (IP67) versions
- Supplied with back box for surface mounting
-
Zeta CP3 Conventional Manual Call Point
- EN54-11 approved conventional manual call point
- Surface mounted (includes back box) or flush mounted with optional bezel
- Positive activation that mimics the feel of breaking glass
- Simple key to reset operating element - no broken glass
-
Zeta CP4 Conventional Manual Call Point
- Very high visibility of the alarm condition
- High impact resistant ABS glass fiber material Fully patented
- Quick and easy installation
-
Roshni Low Profile (RoLP) Conventional Fire Alarm Sounder
- 102dB(A) sound output
- 32 tones (user selectable)
- Optional deep base
- Two stage alarm
- Automatic synchronisation
-
Zeta Mark 1 Addressable Common Sounder Flasher Base c/w Isolator
The CSB sounder base has been designed to achieve a higher number of units to be accomodated on the loop. A maximum of 64 units are now loop powered accross the whole range of Zeta Analogue Addressable panels.
-
Zeta Securetone 2 Conventional Beacon
- Low consumption conventional beacon
- Low profile platform design which can be used standalone or with a detector
-
Ziton Addressable Base Sounder in Polar White
- Detector and sounder from a single wiring point – minimising installation costs
- Powered directly from the ZP loop
- Up to 60 detectors with sounders directly on the loop
- Separate addresses selectable for detector and sounder
- High efficiency sound gun transducer
- Compatible with all ZP loop devices
- Laser alignment aid in the receiver head
- Wide range of international sound types and frequencies
- EN54:3 approved and CPR certified
-
Ziton SPB-2 Addressable Sounder Base in Red or White
- Pluggable base for ZP755 sounder.
- First fix facility.
- Ease of installation.
- Large wiring terminals.