Infinity ID2 System Configurator
Build a complete Infinity ID2 system by selecting the required components below. Compatible items only. Alternatively, choose only the components you need.
Control Panels
Choose from 2, 4 or 8 zone ID2 panels to suit your system size, with an optional repeater for remote panel display.
Infinity ID2 2-8 Zone Fire Alarm Panel
- Ability to wire in Radial or Loop modes (selectable on panel)
- Panel shows exact device in fire, "Bedroom 1", "Main Office", etc.
- Verify alarms to reduce false alarms
Select options to enable “Add to system”.
1
Infinity ID2 Repeater Panel
- Can be programmed to act as fully functional (ability to silence/reset) or passive (shows alarm info only)
- 4 cores required from ID2 panel (2 data + 2 power)
- Can powered from 24V auxiliary PSU in the ID2 panel
£247.62 (inc VAT: £297.14)
1
Detectors
Infinity ID2 detectors are available with a choice of 5 different smoke and heat detection modes.
Infinity ID2 Detector With Optional Integral Sounder
- 4 types of detector available
- All available with optional integral sounder
- Remote LED output
Select options to enable “Add to system”.
1
Black Infinity ID2 Detector With Optional Integral Sounder
- Black plastic moulding to meet aesthetical requirements
- All available with optional integral sounder
- 4 types of detector available
Select options to enable “Add to system”.
1
Manual Call Points
ID2 call points for manual alarm activation, available in indoor and outdoor versions.
Infinity ID2 Manual Call Point
- Manual call point for the Infinity ID2 system
- Indoor or outdoor (IP67) version available
- Visible warning flag confirms activation
£24.09 (inc VAT: £28.91)
1
Interfaces
Used to interface your ID2 system with other building systems or equipment.
Zeta MKII Addressable Input/Output Module
- Loop powered
- Equipped with short circuit line isolator
- Hand addressed using the 8 way dip switch OR softly addressed using the handheld MKII Programmer
Select options to enable “Add to system”.
1
Fyreye MkII Addressable Zone Monitoring Unit with S/C Isolator (loop powered)
- This is a loop powered device, however loop load calculation must be performed to determine the permissable quantity of ZAZM-MI per loop.
- Hand addressed using the 8 way dip switch OR Softly addressed using our handheld MKII Programmer (part no. MKII-TOOL)
- Equipped with short circuit line isolator
£42.67 (inc VAT: £51.20)
1
Zeta SMM/B | Special Mini Module (White) | Addressable Beam Detector Interface
- Addressable loop interface for up to 16 conventional detectors per loop
- 13mA zone output capacity for powering connected devices
- 254 selectable addresses via 8-segment DIL switch configuration
£19.16 (inc VAT: £22.99)
1
Sounders & Visual Alarm Devices
ID2 standalone sounders and visual alarm devices for additional audio and visual warning coverage.
Xtratone MKII Addressable Sounder
- Indoor MKII addressable sounder compatible with Zeta control panels
- 102dB @ 1m sound output
- Available in Red or White
£43.43
Select options to enable “Add to system”.
1
Xtratone MKII Addressable Sounder & Wall VAD
- Combined sounder and VAD in single unit
- 100dB sound output at 1 metre
- Hard or soft addressable capability
£48.54
Select options to enable “Add to system”.
1
Raptor MKII Addressable Weatherproof Sounder
- IP65 weatherproof sounder
- 16 Tone patterns (site selectable)
- Available in red or white
£48.54
Select options to enable “Add to system”.
1
Raptor MKII Addressable Weatherproof Sounder & Beacon
- IP65 weatherproof sounder/beacon
- Flashing rate 0.33Hz - 1.5Hz
- Available in red or white
£53.65
Select options to enable “Add to system”.
1
Batteries, Power and Isolator Switches
Batteries, power supplies and isolator switches support backup operation and safe maintenance.
Casil FR Flame Retardant 12V SLA Fire Alarm Batteries
- V0 flame retardant claasification
- Stable quality & high reliability
- 5 years design time (at 25 degree C)
Select options to enable “Add to system”.
1
Economy Fire Alarm Mains Safety Isolator Switch (Surface or Flush)
- Compliant mains safety isolator keyswitch for fire alarm systems.
- Meets the reuirements of BS 5839 Pt.1 2013.
- Double pole isolation (both live & neutral supply is switched).
Select options to enable “Add to system”.
1
Fire Alarm Mains Safety Isolator Switch
- Safely isolate mains supply
- Ensures mains supply is only isolated by authorised persons with key
- Meets BS 5839 Part1 2002
- Available in Red or White
£15.22
Select options to enable “Add to system”.
1
Installer Essentials & Other Compatible Items
Linian Fire Cable Clips - Pack of 100
- 70% quicker than conventional fire clips
- Suitable for single or double cable runs
- Available in Red, White or Black
Select options to enable “Add to system”.
1
Fire Cable P Clips (Bag of 50)
- Fire cable clips to suit most cable sizes
- Available in Red, White or Black
Select options to enable “Add to system”.
1
Fire Safety Log Book
An A4 fire log book that allows you to keep critical fire safety information and records in one place
Select options to enable “Add to system”.
1
High-Quality 316 Grade Stainless Steel Cable Ties - Packs of 100
- High quality Stainless Steel cable ties.
- Standard in 316 grade stainless steel.
- Sold in packs of 100.
Select options to enable “Add to system”.
1
Pink Sleeving For Functional Earths
- High-grade thin wall PVC
- Continuous 100m coils
- Self-extinguishing flammability
£8.45 (inc VAT: £10.14)
1
Nylon Fire Cable Gland
- IP68 rated protection for superior environmental sealing
- 6mm-12mm cable diameter range with M20 thread size
- Complete with locknut and ready to use from packaging
£0.30
Select options to enable “Add to system”.
1
Your System
0 items • £0.00
Your system is empty. Add a few items to get started.
System Total £0.00
Infinity iD2 System Configurator
This item is not available to purchase online.
Additional information
| Device Type | |
|---|---|
| System | Infinity ID2 |