No
Showing 51–73 of 73 results
-
Hochiki Conventional Schottky Diode Base in Ivory or White
- Integral remote indicator output
- In-line Schottky Diode for line continuity
- Low profile, only 8mm
-
Hochiki Conventional 2 Wire Base In Ivory or White
- Sav-Wire detector mounting base
- Available in Ivory or White
-
Hochiki ESP Short Circuit Isolator Base in Ivory or White
- Features integral SCI
- Compatable with Hochiki ESP sensors
- Available in Ivory or White
-
Hochiki YBN-R/6M Marine Approved Standard Base
- Low Profile (only 8mm)
- Quick connections via square cable clamps
- Accepts 2.5 mm cables
- Bayonet slot, low insertion force for detectors
- Approved to MED by GL
- GL Type approval
-
Marine Mounting Base for Base Mounted Flame Detector
- Detector locking mechanism
- One way fit
- Contains an earth connector
- Easy to wire
- Contains no electrical parts
- Terminal for remote indicator
-
Nittan Evolution Detector Mounting Base
- Universal mounting base for Nittan Evolution range.
- Optional deeper version for surface cable.
-
Nittan Evolution Detector Mounting Base with SCI Shorting Link
- Includes a shorting link to allow loop continuity testing
- Allows for ease of installation cable testing
- Low profile
-
Nittan Evolution Detector Mounting Base With Short Circuit Isolator
- Low Profile Base design.
- -ve Line Isolator.
- Low quiescent current.
- Self resetting when fault clears.
-
Nittan Evolution DIN Rail Mounting Circuit Isolator
- Low Profile Base design.
- -ve Line Isolator.
- Low quiescent current.
- Self resetting when fault clears.
-
Nittan UB-4 Standard Detector Base
- Nittan 4 Terminal Standard Detector Base.
- Low Profile Detector Base.
-
Orbis Intrinsically Safe (IS) TimeSaver Base
- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Continuity link for zone testing
- Detector locking mechanism
-
Orbis Marine TimeSaver Base
The Orbis Marine TimeSaver Base is a design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedure. -
Apollo Orbis TimeSaver Continuity Switch Base
- Facilitates continuity testing for enhanced reliability
- Quick and efficient installation process
- Compatible with Orbis fire detection systems
-
System Sensor Addressable Mounting Base with Isolator
- Low profile (26mm)
- Low Current consumption (100 µA)
- Up to 99 isolators per loop
-
System Sensor B501AP Addressable Mounting Base
- System Sensor addressble sensor base with SEMS screw connections and address identification label.
-
Apollo XPERT 8 Intelligent Mounting Base
- Compatible with Soteria, Discovery and XP95 detectors
- Isolated and non-isolated devices supported
- ‘E-Z Fit’ allows for simple mounting of the detector base
-
YBN-R/3 Hochiki ESP Sensor Mounting Base in Ivory, White or Black
- Common mounting base for Hochiki ESP range of detectors
- Available in Ivory, White or Black
-
YBO-R/3 Hochiki ESP Sounder Mounting Base
- Hochiki ESP sounder base
- Available in Red or White
-
YBO-R/SCI Hochiki ESP Short Circuit Sounder Mounting Base in Red or White
- Features short circuit isolator
- Designed for use with Hochiki ESP CHQ-WS2 and CHQ-WSB sounders
- Available in Red or White
-
Ziton SPB-2 Addressable Sounder Base in Red or White
- Pluggable base for ZP755 sounder.
- First fix facility.
- Ease of installation.
- Large wiring terminals.
-
Ziton SPB-2P Plugable Base for ZP755 Sounder in White
- Ease of installation
- First fix facility
- Large wiring terinals
-
Ziton ZP7 Detector Mounting Base with Isolator
- Protects fire detection loops against short circuits
- Compatible with both enhanced and legacy systems
- Allows detector removal without disconnecting loop wiring
-
Ziton ZP7-SB1-P Standard Base for ZP7 Detectors
- Common to all ZP7 series detectors.
- Automatic locking option.
- Address identification label.
- Easy to install.