Identi-Cryer Message Controller
- Metal enclosure
- Includes IC3/MMSP+Keypad
- 2.5A or 5.25A PSU
Vimpex
Filters
Identi-Cryer Lockdown Alert Voice Sounder
- High sound output
- Optional blue strobe
- Low current consumption
Identi-Cryer Maxi Lockdown Alert Voice Sounder
- Sound output 116 dB(A)
- No special wiring
- Fully synchronised
Identi-Cryer Sounder Splitter
- Expands sounder circuits
- Reduces installation costs
- Pre-wired convenience
Identi-Cryer Lockdown Call Point
- Dual mounting capability for flush or surface installation
- Resettable element eliminates glass replacement costs
- Independent double pole changeover contacts for flexible wiring
Identi-Cryer Lockdown SmartGuard
- Tough retrofitable protective cover
- Easy to install
- Optional 90 dB alarm
Fire-Cryer Solo Voice Base Sounder with Single Fixed Message
- No special wiring, easily retro-fitted
- Fully synchronised
- Uses rocking armature technology for highly intelligible speech
UGO Reset Call Point Key Tool
- 'Swiss army knife' of call point keys
- Covers most major fire alarm call point brands
- Reduced risk of lost call point keys
Banshee Excel BS Conventional Base Sounder
- Slimmest profile in the industry
- Low current consumption
- Available in white or ivory to match to detectors
Banshee Excel CH Sounder
- 32 User selectable Tones
- IP45 and IP65 Versions
- 3 Colour Options
Banshee Excel Flashdome LED Beacon With Optional IP66 Base
- Ultra-efficient LEDs.
- Very low current consumption.
- Sleek, low-profile design.
- Compatible with other Excel Sounders and Sounder Beacons and accessories.
- Uses same bases as Banshee - simple push and twist bayonet mounting with locking screw.
Banshee Excel Lite CHL IP66 Sounder & LED Beacon
- IP66 or weathproof rated (Deep Base option only)
- Very low consumption conventional sounder/flasher
- Easy to install
- Choice of 3 volume levels
ClamBell EN54-3 Approved Fire Alarm Bell
- Permanently fitted gong.
- Specifically designed weatherproof back box.
- Slick and modern looking.
- Fully customised pad printed branding.
- Strobell EN-23 VAD option which integrates ClamBell and VAD for unique combined unit will be available soon.
Hydro-Wire HS End of Line Device
- End-of-line device for Hydro-Wire.
Hydrosense Conventional Water Detection Control Panel
- Multi-zone water leak detection (2, 4, 8 zones available)
- Linear and point detection with Hydrowire and probes
- Battery backup with comprehensive fault monitoring
Hydrosense HS Conventional Repeater Panel
- Hydrosense HS repeater panel to show alarm infromation in additional location.
- Available in 2, 4 or 8 zones sizes.
- Optional integral PSU.
Hydrosense HS Conventional Water Detection Hydro-Probe
- Point leak detection for Hydrosense HS water detection system.
- Ideal for areas where moisture is permitted.
- Drip tray and floor.
Hydrosense HS Conventional Water Detection Hydro-Probe Junction Box
- Interfaces Hydro-Probe with HS panel field wiring.
- 1 Hydro-Probe per junction box.
- Housed in attractive polycarbonate encosure.
Hydrosense HS Conventional Water Detection Hydro-Wire
- Consistent leak detection along the total length of cable.
- Available in 5 and 10 metre lengths (other lengths on request).
- Simple connection and termination.
- Aesthetically attractive.
Hydrosense HS Hydro-Wire Connection Interface
- Interfaces Hydro-Wire with HS panel field wiring.
- 1 Hydro-Wire length per junction box.
- Housed in attractive polycarbonate encosure.
Hydrosense Starter Kit
- Ideal starting point for each detection area.
- Choice if probe or wire.
Identifire 12 or 24V Single Gang Power Supply
- Works at 12 or 24 V dc selectable via link.
- Consistent Identifire design.
- Can be surface or flush mounted.
- Bright green LED power indicator.
- PCB cover to protect users from mains voltage.
Identifire 24 or 12V Auxiliary Relay
- Flush or surfaced mounted options Mains voltage switching capability.
- 4 x 20 mm knockouts for surface and glanded cable entry.
- Terminals to allow daisy chaining of multiple units.
- Dual pole relays and additional terminals allow safe management of earth and neutral cabling when switching mains voltages.
- Bright LED indicating unit activation.
- Consistent look and feel to all other Identifire products.
IdentiFire Remote LED Indicator With Optional Buzzer
- Very bright, easily visible LED.
- Suitable for use on both conventional and addressable alarm systems.
- Available as flush or surface mounted option.
- Available with optional buzzer.