Hochiki ESP Addressable Multi-Sensor Detector
- User selectable modes
- Incorporates optical & heat elements
- Removable, high performance chamber
Filters
CAST Multi-Sensor Detector
- A high-quality programmable multi-sensor detector for use with C-Tec's XFP & ZFP CAST protocol addressable fire panels
- Onboard programmable heat & smoke sensors make it deal for detecting a wide range of fires whilst also reducing false alarms
- Multiple sensitivity/sensor settings
CAST-PRO Smoke + Heat Multisensor
- Advanced algorithms for reduced false alarms
- Multiple detection modes for customisable sensitivity
- Onboard short circuit loop isolator for enhanced safety
CAST-PRO Smoke + Heat Multisensor with Sounder
- Multiple functionality in a single device: smoke & heat detection plus tone alarm
- Advanced algorithms for reduced false alarms
- Onboard short circuit loop isolator for enhanced safety
CAST-PRO Smoke + Heat Multisensor with Sounder & Red VAD
- Multiple functionality in a single device: smoke & heat detection plus tone alarm & red VAD
- Advanced algorithms for reduced false alarms
- Onboard short circuit loop isolator for enhanced safety
CAST-PRO Smoke + Heat Multisensor with Sounder & White VAD
- Multiple functionality in a single device: smoke & heat detection plus tone alarm & white VAD
- Advanced algorithms for reduced false alarms
- Onboard short circuit loop isolator for enhanced safety
CAST-PRO Smoke + Heat Multisensor with Voice Sounder
- Multiple functionality in a single device: smoke & heat detection plus voice sounder
- Advanced algorithms for reduced false alarms
- Onboard short circuit loop isolator for enhanced safety
CAST-PRO Smoke + Heat Multisensor with Voice Sounder & White VAD
- Multiple functionality in a single device
- Advanced algorithms for enhanced detection
- Compatible with C-TEC's CAST fire panel
CAST-PRO Smoke + Heat Multisensor with Voice Sounder & Red VAD
- Multiple functionality in a single device
- Advanced algorithms for enhanced detection
- Compatible with C-TEC's CAST fire panel
CAST-PRO CO Fire + Smoke + Heat Multisensor
- Programmable fire detection with multiple modes
- Advanced algorithms for false alarm reduction
- Compatible with C-TEC's addressable fire panel
CAST-PRO CO Fire + Smoke + Heat Multisensor with Sounder
- Multiple functionality in a single device
- Advanced algorithms for enhanced detection
- Compatible with C-TEC's CAST fire panel
CAST-PRO CO Fire + Smoke + Heat Multisensor with Sounder & White VAD
- Multiple functionality in a single device
- Advanced algorithms for enhanced detection
- Compatible with C-TEC's ZFP CAST protocol
Nittan Evolution H2 Addressable Heat Detector with Short Circuit Isolator
- Heat category P (A1R/A2S/BS/CS)
- Integral -ve short circuit isolator
- Evolution FSK protocol
- EEPROM addressed with programmer
Nittan Evolution PY Addressable Optical Smoke Detector with Short Circuit Isolator
- Integral -ve short circuit isolator
- Improvements to smoke sensing chamber
- Orange LED, which significantly improves response across the fire spectrum
- Chamber construction is also designed to minimise the effect of dirt/dust contamination
Nittan Evolution PYH Addressable Optical & Heat Multi-Sensor Detector
- Replaces EV-PH from September 2024
- Orange optic LED and PY type Chamber
- 3 sensitivity settings
- Heat category A1R
Nittan Evolution PYH Addressable Optical & Heat Multi-Sensor Detector with Short Circuit Isolator
- Orange optic LED and PY type chamber
- 5 sensitivity settings
- Heat category P (A1R/A2S/BS/CS)
- Integral -ve short circuit isolator
Hochiki ESP Addressable Multi-Sensor With CO Detector
- Low profile design
- Heat, optical and CO sensing elements
- 10 year CO sensor life
Hochiki ESP Addressable Weatherproof Heat Detector
- User selectable modes
- Incorporates fixed temperature and rate of rise heat elements
- IP67 rated for waterproof protection
ESP FIREbeam XTRA Analogue Addressable Beam Smoke Detector
- 7-70 m standard detection range
- Extensions kits available to enhance detection range up to 160m
- Fully compatible with the Hochiki ESP analogue addressable protocol
Apollo 58000-305 Discovery CO & Heat Multisensor Detector
- Responds to smouldering and flaming fires.
- Less susceptible to false alarms caused by steam and dust.
- Five response modes.
- Remote test feature.
Apollo Discovery 58000-300 Carbon Monoxide Detector
- Early warnign of carbon based smouldering fires.
- Resistance to false alarms in areas with high levels of steam and other airborne particles.
- Ideal for protecting small volume sleeping risk areas.
- Resitance to contamination in dirty and dusty conditions.
- Excellent supplement to fire detection systems to improve detection of smouldering hydrocarbon fires.
Apollo Discovery Heat Detector
- Ideal in environments that are dirty or smoky under normal conditions
- Well-suited to warehouses, loading bays and car parks
- Unaffected by wind or atmospheric pressure
- Five response modes
- Remote test feature
Apollo Discovery Multisensor Detector
Key Features
- Ideal for a wide range of applications
- Enhanced false alarm management
- Recommended, in specific modes, for hotel bedrooms and hospital wards
- Unaffected by wind or atmospheric pressure
- Well-suited to sensitive environments
- Five EN 54 approved response modes
- Heat only and optical only options
- Remote test feature
Apollo Discovery Optical Smoke Detector
- Photo-electric detection ideal for slow burning and smouldering fires
- Five EN54 approved response modes for flexible sensitivity settings
- Digital communication compatible with Discovery, XP95 and CoreProtocol systems