Conventional Detectors
Showing all 34 results
-
Apollo Series 65 Optical Smoke Detector
- Responds to slow fires
- Suitable for bedrooms
- Unaffected by wind
-
Apollo Series 65 Conventional Heat Detector
- Series 65 conventional heat detector.
- Choice of 4 heat classes.
- Ideal for environments that are dirty or smoky under normal circumstances.
-
Fyreye MKII Conventional Optical Smoke Detector
- Conventional optical smoke detector
- Compatible with most conventional systems
- 8 alarm indication LEDs
-
Fyreye MKII Conventional Rate of Rise and Fixed Heat Detector
- Conventional heat detector wirth Rate of Rise or Fixed Heat trigger @ 57 °C
- Compatible with most conventional systems
- 8 alarm indication LEDs
-
Fyreye MKII Conventional Fixed Heat Detector
- Conventional fixed high-temperature heat detector
- Compatible with most conventional systems
- 8 alarm indication LEDs
-
Apollo Orbis Conventional Optical Smoke Detector
- Improved sensitivity to black smoke
- Compensation for build-up of dirt
- Extra confirmation of smoke before an alarm signal is given
-
Apollo Orbis Conventional Optical Smoke Detector, Non-Latching
- Improved sensitivity to black smoke
- Compensation for build-up of dirt
- Extra confirmation of smoke before an alarm signal is given
-
Fyreye MKII Conventional Fyreye Fixed Heat (CS) Detector
- Designed to meet EN54 requirement
- Lockable to base to stop unauthorised removal
- Remote LED output
-
Hochiki CDX Conventional Smoke Detector
- Removable high performance chamber
- Automatic sensitivity window verification
- Approved by LPCB and VdS
-
Gent ES Detect Conventional Heat Detector
- Range of detection technologies with advanced microprocessor controlled detection
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life
- Compatible with diode base to monitor detector removal
-
Gent ES Optical Smoke Conventional Detector
- Optical smoke detector for early detection of fire.
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life.
- Compatible with diode base to monitor detector removal.
-
GST DC-9101E Conventional Combination Smoke & Heat Detector
- Combined optical smoke and A2R class heat detector.
- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
-
GST DC-9102E Conventional Photoelectric Smoke Detector
- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
-
GST DC-9103E Conventional Rate-of-Rise & Fixed Temperature Heat Detector
- Self-diagnostic.
- Local test activation with reed switch.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
- Configurable polling LED support.
- Remote indicator output.
- 3 Programmable operating levels (A1R, A2S and BS).
-
Hochiki CDX Conventional Combined 60 Degree Heat Detector
- Electronic linear heat detection
- Twin fire LEDs allow 360° viewing
- Approved by LPCB & VdS
-
Hochiki CDX Conventional Fixed 60 Degree Heat Detector
- Electronic linear heat detection
- Twin fire LEDs for 360° viewing
- Wide voltage range of 9.5 to 30 V DC
-
Hochiki CDX Conventional Combined 90 Degree Heat Detector
- Electronic linear heat detection
- Incorporates a 90°C fixed temperature element
- Approved by LPCB & VdS
-
Hochiki CDX Conventional Fixed 90 Degree Heat Detector
- Electronic linear heat detection
- Remote indicator output
- Wide voltage range (9.5 to 30 V DC)
-
Hochiki Conventional Weatherproof 60 Degree Heat Detector in Ivory
- Waterproof design - rated to IP67
- Low profile shape
- Utilises a bi-metallic strip to sense temperature change
- No mounting base required
- No standby current
- Approved by LPCB & VdS
-
Eaton Conventional Enhanced Optical Smoke Detector
- Low profile design
- 360° viewable LED design
- Removable detector chamber for cleaning
-
Eaton Conventional Heat Detector
- Rate of rise, fixed at 77°C or fixed at 92°C models available.
- 360° visibility LED using lightpipe technology.
- Aesthetically pleasing.
- Quick and simple to install.
-
Eaton FXN922 Selectable Multi-Mode Conventional Detector
- 5 modes in 1 detector
- Chamber monitoring and drift compensation dual LED
- ‘Self-Check’ facility
-
Nittan EVC-P Evolution Conventional Optical Detector
- Optical smoken detector from Nittan.
- Omniview 360° LED.
- Internal alarm current limiting resistor.
- Wide operational voltage range (12v-32v).
-
Nittan Evolution Conventional Heat Detector
- 62°C or 92°C conventional heat detector from Nittan.
- Omniview 360° LED.
- Internal alarm current limiting resistor.
- Wide operational voltage range (12v-32v).
-
Nittan EVC-DP Evolution Conventional Dual Optical Detector
- Dual Optical Detector Reduces False Alarms.
- Omniview 360° LED.
- Internal Alarm Current Limiting Resistor.
- Wide Operational Voltage Range (16v-32v).
-
ActiV Conventional Optical Smoke Detector
- High-quality optical smoke detector
- Drift compensation functionality
-
ActiV Conventional Heat Smoke Detector
- Heat Class A1r, A2 & B
- Third-party certified to EN54-5 by Intertek
- Carries the pan-European ‘CertAlarm’ mark
-
ActiV Conventional Multi-Sensor Fire Detector
- Optical + heat multi-sensor
- Drift compensation functionality
-
Kidde Commercial Conventional Optical Smoke Detector
- Programmable smoke sensitivity levels for tailored detection
- Self-diagnostic capabilities for enhanced reliability
- All-round LED visibility for easy status monitoring
-
Kidde Commercial Conventional Heat Detector
- Self-diagnostic capabilities for enhanced reliability
- All-round LED visibility with a 360° viewing angle
- Three programmable operating levels for versatile applications
-
Kidde Commercial Conventional Multisensor Detector
- Integrated photoelectric and heat detection technology
- Programmable smoke sensitivity levels for enhanced adaptability
- All-round LED visibility for easy status indication
-
Apollo Orbis Conventional Heat Detector
- Wide range of heat detector classes for various conditions
- Rate-of-rise and static temperature detection capabilities
- Open-web casing for improved air flow and temperature measurement
-
Apollo Orbis Conventional Multisensor Detector
- Responds well to fast-burning, flaming fires
- Transient rejection algorithms reduce false alarms
- Automatic drift compensation with DirtAlert™
-
Ziton Z600 Series Conventional Heat Detector
- Aproved to EN54 Parts 5 and CPD Certified
- Low profile conventional design
- Head out continuity support
- Range of surface bases
- Plug in base with automatic locking