Uncategorised
Showing 151–200 of 312 results
-
Gent Vigilon Call Point Cover
Key Features
- Manufacturer: Gent by Honeywell
- Designed for use with the Gent Vigilon Call Points
- Hinged Design For Access To Call Point Element
- Made from Polycarbonate Plastic
- Helps prevent accidental & malicious alarm activations
-
Gent XENS-SPARES Spares Pack For Xenex Panels
- Spare pack for Gent Xenex panels.
- Includes EOLs, battery link, screws and fuses.
-
Graphite Intumescent Sleeve For Deedlock Double Magnet
- Pair of intumescent sleeves which fit around the armature bolts of Deedlock double maget.
- Provides protection for 60 or 30 minute fire doors.
-
Graphite Intumescent Sleeve For Deedlock Single Magnet
- Intumescent sleeve fits around the armature bolt of Deedlock single maget.
- Provides protection for 60 or 30 minute fire doors.
-
HobWatcher Automatic Hob Isolator System
- Single compact unit for ease of installation
- Hob run timer preset at 10 minutes
- Protects vulnerable kitchen users
- Protects distracted kitchen users
- Reduces risk of kitchen fires
- Isolates a load of up to 7.5KW
- Visual power on indication
- Audible and visual power isolation warning
- Audible and visual Reset
- Selectable cooking times
- Option for extractor fan control
- Anti tamper features
- Dimensions 180(l)x100(h)x50(d)mm.
-
Hochiki CDX Conventional Photoelectric Smoke Detector
- Removeable High Performance Chamber
- Remote Indicator Output
- Low Profile Design
- Available in White
-
Hochiki PL-2 Legacy Device Programming Lead Programming Lead (Jack Plug to Croc Clip)
- Allows Hochiki TCH-B200 to program legacy ESP devices.
-
Hochiki PL-3 Additional Programming Lead 3 Way Connection
- For use with Hochiki devices with square connector
- Allows connection of TCH-B200 programmer
-
Hochiki SI/CAP2 Base Sounder or Isolator Cover
- Protects wiring terminals on isolator bases and base sounders
- Easy to fit
- Available in Ivory or White
-
Hochiki SR/Y Mounting Box for Hochiki Manual Call Points
- For surface mounting of the HCP call points
- Standard red or Yellow
- 32mm deep
-
Hot Work Kit
- Includes 2kg ABC powder fire extinguisher (approved to BSEN3).
- Includes K40 1.2 x 1.8m high performance fire blanket.
- Plastic pocket for storage of Hot Work Permit forms.
- Rolls up into an easy to carry, easy to store bag ready to take onto site.
-
Howler Site Alert RF Heat Detector
Key Features
- Simple to configure and re-configure using dip switches
- Powered using easily sourced, low cost alkaling batteries
- Disconnection and battery status reflected by the site alert RF master unit
- Radio linked via the master unit to manual call points
- Can link to 31 units
- Radio frequency with 868 Mhz class 1 receiver
- Battery Operated - no mains power required
- Weatherproof design
-
Howler Site Alert RF Wireless Site Alarm
- Wireless Linking - Up to 30 units can be linked – no trailing wires
- Weatherproof - Push on/push off switch operation
- Loud - 100dB at 1 metre.
-
Internal Printer Module Kit For Morley ZX Panels
- Internal printer kit for Morley ZX5e panel
- Provides 40 character printer output
-
Intumescent for FD30 & FD60 Timber Fire Doors to suit AL900
- Fire rated for use on 30 min timber doors to EN 1634 opening inward and outward – Fire Assessment Report No WF 419607 by Warrington Fire.
- Fire rated for use on 60 min timber doors to BS 476 (Report with GE Door Manufacturer).
-
KAC Call Point Cover Seal – Pack of 5
Key Features
- Call Point Cover Anti Tamper Seals
- For Use With The New Type KAC Call Points and Covers
- Pack of 5
-
KAC Plastic Resettable Element For Call Points
- Compatible with the New Type KAC Call Points (See related products)
- Enables the call point to be reset after alarm is activated
- Yellow indicator on plastic element indicates to user that the call point has been activated.
-
KAC Spare Call Point Glass, Pack of 5
Key Features
- This glass is suitable for use in the following type Call Points:
- KAC
- Apollo
- Morely
- Fulleon
- Ziton
- Notifier
- Electro Detectors
- EMS
- System Sensor
- Nittan
- Dimensions (HxWxD): 40mm x 71mm x 1.5mm
-
Kentec Addressable Matrix Mimic Panel For Syncro AS or Taktis
- Up to 504 LED’s can be controlled from any Taktis Fire or Syncro AS panel.
- Full colour printing.
- Available in a range of standard enclosures to suit any applications.
- Bespoke sized units can be made upon request.
- Choice of Red, Green or Yellow LED’s.
- Available with or without controls.
-
Kentec B1828 Replacement 2 Position Controls Enabled Keyswitch
- Kentec 2 position controls enabled keyswitch.
- Replacment for Syncro and Sigma range of panels.
-
Kentec Economy Software Download Lead
- Software Lead for Syncro, Syncro AS, Solo, and Solex Panels
-
Kentec K768P2 Syncro AS Printer Enclosure
- Matches design & colour scheme for standard Sigma CP/XT & Syncro AS control panel ranges.
- Compatible with Syncro & Taktis fire panels.
- Easy to install.
- Front loading printer for quick and easy paper changes.
-
Kentec LCMU Line Continuity Monitoring Unit
- LCMU for Kentec Sigma panels.
- Easy to install.
- No additional wiring point.
-
Kentec Sigma CP Ancillary PCB
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Kentec Sigma CP Sounder PCB
- Two wire serial connections.
- Up to 7 sounder boards per system.
- 230V AC or 24V DC powered versions.
- Zoned, 2-stage or common alarm
- All outputs monitored for open and short circuit faults
- Individual open and short circuit fault indicators
- Fully monitored by main control panel
- Class change input facility
- Up to 8 outputs with 0.5A available from each
- Can be connected to serial bus with Ancillary boards and repeaters
- Boxed units in enclosure to match Sigma CP control panels
- Power fault input for monitoring remote power supplies
-
-
Kentec Syncro 4 Way Conventional Detection Zone Module
- 4 Monitored Detection Zone Inputs
- 2 Monitored Sounder Outputs
- Direct Replacement for Conventional Control Panel for integration in to an addressable System
-
Kentec Syncro 6 Way Sounder Extender Board
- 6 Individually Fised and Monitored Sounder Outputs
- Fault and Operated Indications
- Common Footprint to other Syncro I/O
- Compatible with Syncro AS Panels
-
Kentec Syncro 8 Way Extender Board
- 8 Volt Free Changeover Relay Contacts
- Common Footprint to Other Syncro I/O
- Compatible with Syncro AS Panels
-
Kentec Syncro AS I/O Expansion Board Enclosure with optional PSU
- Matching design & colour scheme for Kentec new style control panel range.
- Easy to install.
- Incorporates Kentec's 'Quick Fit' lid & equipment chassis.
- Front panel mounted status LED indication.
- Space for 3.2Ah batteries.
- Choice of power supplies.
-
Kentec Syncro AS Loop 2 Expansion Card
- Loop 2 Expansion Card
- Available in Apollo, AV, and Hochiki Protocol
-
-
Kentec Syncro AS or Taktis Addressable Programmable LED Indication Panel
- 24 programmable LEDs.
- Up to 16 x 24 way Addressable Ident can be connected to each fire panel.
- Programmable flashing or steady states.
- Red, yellow or green indications/ options.
- Common Fire, Fault and Disabled indication.
- Customisable label identification tags.
-
Kentec Syncro Fault Tolerant Network Interface Card
- High Integrity Protocol
- Simple 2-wire Loop Connection
- Repeaters Share Network Connection
- Flexible Configuration Option
-
Kentec Syncro I/O 16 Channel I/O Board
- 16 Channels
- Simple two-wire Connection to Control Panel
- Full Cause and Effects
- Compatible with Syncro AS Panels
-
-
-
Kentec Syncro Si Addressable Extinguishant Status Unit
- Reduced installation costs
- Loop powered & wired directly onto either detection loop
- Optional mode select keyswitch
- Protected dual action manual release switch option
- Robust, high quality enclosure
- Only compatible with Apollo protocol Syncro XTand Syncro XT+ control Panels
- Weatherproof version available
-
Kentec Syncro View Local LCD Repeater Panel
- Large LCD Display
- Internal Sounder
- Control Enable Switch Option
- 750mA PSU Option
-
-
-
Legend for Vale LED Emergency Exit Sign
- Directional legend with use with the Vale emergency exit sign.
- Available with Down or Left/Right arrow.
-
Legend Kit for Ruskin LED Emergency Bulkhead
- Directional legend kit with use with the Ruskin LED bulkhead.
- Arrow can be orientated Left, Right, Down or Up.
-
Lexicomm ViLX-72HR-Box Extended Duration Battery Box
- Enclosure to house larger 17ah battery.
- Solution when extended battery back is required.
-
Lexicomm VILX-ACP Assist Call Cancel Button
- BS 8300-2:2018 “Acknowledge” feature.
- Blue “Halo”.
- Braille enhanced Cancel button.
- Stainless steel finish.
-
Lexicomm ViLX-ACP-66 Weatherproof Assist Call Cancel Button
- IP66 weatherproof enclosure.
- Ideal for showers/wet areas.
- Stainless fascia.
- Flush or surface mounting.
- BS 8300-2:2018 “Acknowledge” feature.
-
Lexicomm ViLX-CBZ Flush Mount Stainless Steel Bezel for ViLX-ACM-8 and ViLX-EX8
- Brush stainless bezel for Lexicomm assist call master station or expander.
- Provides a professional finish.
-
Lexicomm ViLX-CBZ Master Station Semi Recess Bezel
- Brush stainless bezel for Lexicomm master stations.
- Provides a professional finish.
-
Lexicomm ViLX-CLP Assist Call Call Plate
- BS 8300-2:2018 “Acknowledge” feature.
- Blue “Halo”.
- Flush or surface mounting.
- Braille enhanced call button.
- Stainless Steel finish.
-
Lexicomm ViLX-CLP-56 Weatherproof Assist Call Mushroom Button
- Key reset.
- IP56 ABS enclosure.
- Pool alarm.
- Panic alarm.
- Highly visible.