Uncategorised
Showing 251–300 of 312 results
-
Semi Flushing Bezel for Meteor Maxi LED Bulkhead
- Semi-flushing bezel for Meteor Maxi LED light.
- Can be easily retro-fitted.
-
Semi-Flushing Bezel For Advanced MxPro 5 Panels
- Semi flush fitting for all MxPro 5 panels.
- Picture frame effect for ease of installation 30mm flange for control panels, 20mm for repeaters.
-
Sigma CP Sounder Controller Unit
- Two wire serial connection
- 230V AC or 24V DC powered versions
- All outputs monitored for open and short circuit faults
- Fully monitored by main control panel
- Up to 8 outputs with 1A available from each
- Boxed units in enclosure to match Sigma CP control panels
- Up to 7 sounder boards per system
- Zoned, 2-stage or common alarm
- Individual open and short circuit fault indicators
- Class change input facility
- Can be connected to serial bus with Ancillary boards and repeaters
- Power fault input for monitoring remote power supplies
-
SigTEL Disable Refuge System Anti-Tamper Stainless Steel Enclosure
- An attractive flush-mounting tamper-resistant cabinet for housing an ECU-4 or ECU-8 master controller
- Helps ensure controllers remain operational at all times by reducing the risk of vandalism
-
SigTEL Line Tester
- Allows cable faults to be checked and cleared prior to equipment connection
- Includes all of the test cables and connectors you need
-
SigTEL Programming Configurator
- Facilitates quick and easy editing of outstation/extension names via a Windows-compatible PC
- Includes a software CD, configurator and mini USB to master controller connection lead
-
SigTEL Weather Resistant Enclosure ForType B Outstations
- An attractive IP66 rated enclosure designed for use with a SigTEL EVC302GF or EVC302F flush mounting disabled refuge controller.
- Includes a handle and mounting plate.
-
Simplicity Plus Addressable Fully Functional Repeater Panel
- Compatible with all Simplicity Plus Panels
- Certified to EN54 parts 2 & 4
- Sleek Metal Design
-
Single Prism Plate For Use With FFE Universal or Adjustment Bracket
- Single prism plate for FFE prisms.
- For use the FFE Universal Bracket or Adjustment Bracket.
-
SmartCell 6V, 4Ah Sealed Lead Acid Battery for SmartCell Control Panel
- Specifically designed for use with the SmartCell control panel
- 6V voltage and 4Ah capacity
- Ensures uninterrupted power supply for the control panel
-
SmartCell Panel Communications Module
- Provides remote connection option for SMS/email updates
- For internal connection within the SmartCell control panel
- Includes GSM antenna and SIM card
- Requires SC-94-0001-99 SmartCell remote services annual contract
-
SmartConnect Mulit-Loop RS232 Printer Module
- Designed to EN54 requirements
- Use to interface to RS232 devices
- 5V aux output (ofr use with panel printer only)
- Extensive front unit indications
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with Unit)
-
SmartConnect Multi-Loop 6 Way Conventional Zone Monitor
- Designed to EN54 Part 2
- 6 x Conventional Zones
- Each zone is monitored for open & short circuit
- Extensive front unit status indications (see table below)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with unit)
- Each zone input can be configured as either Alarm or Technical Alarm
-
SmartConnect Multi-Loop Alarm Circuit Module
- Can be configured as an alarm output or a power output
- 2 x output circuit (500mA each)
- Extensive front unit status indications
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with unit)
- Power limited
-
SmartConnect Multi-Loop Card Module
- Designed to EN54 requirements
- Supports up to 250 addresses
- “Heartbeat LED” that shows communication between the module and the motherboard
- Extensive front unit status indications
- Time saving AUTO-LEARN facility
- 450mA max load (at 20 ohms loop resistance)
- Double address detection
-
SmartConnect Multi-Loop Gas Detection Module
- Each SCM-4-20 module has 2 available circuits
- Each circuit will allow a single connection of a 4-20mA device
- Extensive front unit status indications
- Compatible with any Smart Connect Multiloop Panel
- Quick Connect Din Rail Mount
-
SmartConnect Multi-Loop Multi-Input Module
- Designed to EN54 Part 2
- Each input is monitored for open & short circuits
- Extensive front unit status indications (See Datasheet)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with Unit)
- Each input can be configured as either Alarm or Supervisory
-
SmartConnect Multi-Loop Multi-Relay Output Module
- Designed to EN54 Part 2
- 3 x Form C relay outputs
- Each relay can be programmed to activate on Alarm, Technical Alarm, or Fault.
- Extensive front unit indications (see datasheet)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with Unit)
-
SmartConnect Multi-Loop Repeater
- 4.3” colour touch screen display
- 8032 event log entries
- Up to 64 panel peer-to-peer network
- 13 status LED indicators
- 5 function button controls
- Fully functioning repeater provides the ability to program a networked Smart Multi-loop control panel from the front screen
- Accommodates wiring lengths up to 1000 metres from the control panel for added design and install flexibility
- Network can we wired in either a bus or a ring topology if a redundant path is required
- 8 password protected access accounts available (1 admin level, 7 user level)
- Uncluttered and intuitive interface allows alarms, tech alarms, and fault events to be easily viewed
- Low power consumption
- Small enclosure
-
SmartConnect Multi-Loop RS485 Network Module
- Designed to EN54 requirements
- Peer-to-peer networking
- Comprehensive cross network cause & effects
- Remote programming over the network
- The network can be configured with either a ring or bus topology
- Extensive front unit status indications (See datasheet)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (Cable supplied with unit)
-
SmartConnect Multi-Loop TCP/IP Module
- Designed to EN54 requirements
- TCP-IP output via RJ45
- Zeta Remote monitoring via a desktop PC or smartphone via the cloud
- Remote control via the cloud
- Responsive web interface
- “Heartbeat LED” that shows communication between the module and the motherboard
- Extensive front unit indications
- Quick and simple to install
-
Sounder Active EOL For Advanced MxPro 5
- For use with EN54-13 Compliance.
- Supports device removal.
- For use with all MxPro 5 series control panels.
-
Spare Ceramic Tube for the Redlam Panic Bolt, Pack of 20
- Replacement ceramic tubes
- Ceramtubes™ are designed to produce no sharp edges when smashed
- Ceramtube™ Dimensions: L127mm x D17mm
- Available in packs of 20 or individually
-
Spare Controls Enable Key for Fike TwinflexPro & TwinflexPro 2 Panels, Single Key
- Spare controls enabled key for Fike TwinflexPro & TwinflexPro2 panels.
- Sold individually.
-
Spare Fob/Card for APX19 Standalone Mifare Proximity Reader
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Spare Glass for Eaton Fulleon CX Manual Call Point, Pack of 10
- Spare glass for CX manual call points.
- Sold in pack of 10.
-
-
Spare System Controller for Fireray 5000
- Spare systems controller for the Fireray 5000 auto-aligning beam detector.
-
STI Integral Call Point Protective Cover
- Basic call point protection.
- Complies with BS5839-1:2017.
-
STI Stopper Service & Silence Pin
Enter a brief description of your product here. This description will be displayed on product list pages.
-
STP EM300ABP Armature Back Plate for Slim Maglocks
- Aluminium.
- 2 required for double maglocks.
- Surface mount.
- Used to avoid drilling through the door.
-
-
SyCALL SY-FMP01 Flush Mounting Plate, Single or Pack of 10
- Bezel to flush mount SyCALL manual call points.
- Sold in packs of 10.
- Sold Individually.
-
-
TwinflexPro Goody Bag
- Replacement goody bag for TwinflexPro panels
- Contains spare fuses, battery connectors, etc.
- Compatable with 505-0002, 505-0004 & 505-0008
-
TwinflexPro2 505-0007 Conventional Expansion Card
- Expand TwinflePro2 panel with 4 conventional zones.
- Compatible with Apollo, Hochiki, Nittan or System Sensor conventional detectors.
- Compatible with TwinflexPro2 4 zone panel only.
-
Universal Bracket For FFE Fireray 5000 Detector Head or Prism Plate
- Universal bracket for Fireray 5000 detector head or prism plate.
- Bracket pivots for accurate alignment of beam detector and prisms.
-
Universal Ceiling Mount for Fireray 5000, 3000, Prism or Universal Bracket
- Universal ceiling mount for the Fireray 5000, Fireray 3000, Fireray prism or Fireray universal bracket.
- Supplied with 2 x mounting plates and 1 x blank cover plate.
-
USB A to B Cable Lead, 5m in Black
- USB lead suiable for program,ming many fire panels.
- 5m in length.
-
VESDA High Level Interface HLI
- Direct access and monitoring of VESDAnet system
- Seamless data transfer from your VESDAnet to your PC
- Easily configured using Xtralis configuring and monitoring software packages
- Designed for small or large networks
- VHX-0210 includes modem support for remote notification & interrogation
-
Vesda VEA Sampling Points
- Two different types, standard and surface mount.
- Available in black or white.
- Full supervision.
- Automated cleaning by the detector.
-
Vesda Xtralis 9 Pin Serial Lead
Enter a brief description of your product here. This description will be displayed on product list pages. -
Vesda Xtralis Refrigerated Storage Sampling Kit
- Enables the ASD pipe to be installed, inspected and maintained outside the Refrigerated Storage facility hence enabling fire contractors to work in ambient conditions most of the time.
- Suited for facilities with and without ceiling cavities
- Eliminates the need for expensive HDPE (high density polyethylene) pipe inside the Refrigerated Storage facility
- Eliminates the need for costly access equipment hire for on-going service/maintenance
- Eliminates the need for heat tracing
- Less prone to blockage due to icing
- Provides a generally more robust ASD installation for these unique environments
- Provides considerably improved aesthetics
- Minimizes the need for “Back Flush” systems
- Offers all round cost savings
-
VESDA-E VEA Addressable Multi-way Interface, Pre-wired & Pre-addressed
- Pre-wired OEM interface assembly
- Pre-addressed pipe relays as per client specification
- Supporting the major addressable fire alarm protocols
- Full functional and 24 hour soak test prior to delivery
- Easy installation reducing overall completion time
-
Xtratone Conventional Wall Sounder
- Complies with EN54 Part 3 Type A
- 102dB @ 1m sound output
- 22 Tone patterns (site selectable)
- Flush or surface fixing
- Housed in UL V0 flame retardant ABS
- 4 x 20mm cable entries (2 top, 2 bottom)
- First fix, wire to back box technology
-
Z & L Bracket to suit Deedlock Slimline Surface Magnets
- Various accessories available to work with magnets
- Securefast AEMBR089 Z&L Bracket Set for Slimline Magnet to suit Inward opening door.
- Deedlock Brackets for Slimline Magnets
- Various accessories available to work with Slimline, mini magnets
- Architectural brackets are aesthetically pleasing, ideal for buildings requiring modern and attractive appearance
- Finish matches the electro magnet
-
Z & L Bracket to suit Superior Surface Magnets
- Z & L bracket the superior grade 4 surface magnets AEM12100 & AEM12200.
- Suitable for inward opening doors.
- Finish matches the electro magnet.
-
Z Bracket (Inward Opening Gate) to suit External Single Gate Magnet
- Z bracket available to fix armature of AEMGATE/F/S.
- Suitable for inward opening single extrenal gates.
- Finish matches the electro magnet.
-
Z&L Bracket Set (F Type) to suit CQR Slimline Surface Magnets
- Adjustable Bracket: The Z&L Bracket Set (F Section) is an adjustable bracket, making it suitable for various door opening configurations
- Slimline Magnets: The bracket set is designed to work with CQR Slimline Surface Magnets, which are known for their sleek and modern design
- Compatibility with CQR Magnetic Contacts: The bracket set is compatible with CQR magnetic contacts, which are suitable for use in ungraded, grade 1, and grade 2 systems
-
Zener Barrier
- Simple installation onto standard DIN railing
- Removable colour-coded terminals for easy connection, accommodate conductors up to 2.5 mm2
- Supports up to two zones of I.S. products
- Input circuitry protected against reverse polarity
- Can be used with the IFD-E(IS) industrial IR3 flame detector