No
Showing 251–300 of 387 results
-
Gent ES Optical Smoke Conventional Detector
- Optical smoke detector for early detection of fire.
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life.
- Compatible with diode base to monitor detector removal.
-
Gent Indoor Conventional Manual Call Point
- Fully compliant with EN54, Part 11.
- Choice of re-settable or glass operating element option.
- Semi-flush or surface mounting.
- 470 Ohm resistor.
-
Gent S-Quad Addressable Detector
- Heat, dual angle optical scatter and carbon monoxide (CO)
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
-
Gent S-Quad Addressable Detector with Sounder
- Heat, dual angle optical scatter and carbon monoxide (CO)
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
- Sound output synchronised and compatible with S-Quad range of EN54-23 VADs
-
Gent S-Quad Addressable Detector with Voice
- Dual optical heat sensor
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
- Sound output synchronised and compatible with S-Quad range of EN54-23 VADs
-
Gent S-Quad Addressable Detector with Voice & VAD Beacon
- Heat, dual angle optical scatter and carbon monoxide (CO)
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
- Sound output synchronised and compatible with S-Quad range of EN54-23 VADs
-
Gent Weatherproof Conventional Manual Call Point
- Fully compliant with EN54, Part 11.
- Glass operating element.
- Weather proof IP67.
- Supplied with surface mount back box.
-
GST DB-01D Common Conventional Detector Diode Base
- Common for all GST DC series detectors.
- Supports detectors locking to prevent unauthorised removal.
- Easy to install with standard mounting options.
-
GST DC-9101E Conventional Combination Smoke & Heat Detector
- Combined optical smoke and A2R class heat detector.
- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
-
GST DC-9102E Conventional Photoelectric Smoke Detector
- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
-
GST DC-9103E Conventional Rate-of-Rise & Fixed Temperature Heat Detector
- Self-diagnostic.
- Local test activation with reed switch.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
- Configurable polling LED support.
- Remote indicator output.
- 3 Programmable operating levels (A1R, A2S and BS).
-
GST I-9105R Reflective Infrared Beam Smoke Detector
- Wide operating voltage range.
- Large protection areas.
- Combination of transmitter & receiver in one housing allows easy optical alignment.
- Intelligent microprocessor based decision making on fire and fault statuses.
- Easy one person installation & operation due to simple calibration and setup processes.
-
Hochiki CDX Conventional Combined 60 Degree Heat Detector
- Electronic linear heat detection
- Twin fire LEDs allow 360° viewing
- Approved by LPCB & VdS
-
Hochiki CDX Conventional Fixed 60 Degree Heat Detector
- Electronic linear heat detection
- Twin fire LEDs for 360° viewing
- Wide voltage range of 9.5 to 30 V DC
-
Hochiki CDX Conventional Combined 90 Degree Heat Detector
- Electronic linear heat detection
- Incorporates a 90°C fixed temperature element
- Approved by LPCB & VdS
-
Hochiki CDX Conventional Fixed 90 Degree Heat Detector
- Electronic linear heat detection
- Remote indicator output
- Wide voltage range (9.5 to 30 V DC)
-
Hochiki CDX Conventional Mounting Base
- Integral remote indicator output
- Low profile, only 8 mm
- Rugged design and electronics free
-
Hochiki Conventional Schottky Diode Base in Ivory or White
- Integral remote indicator output
- In-line Schottky Diode for line continuity
- Low profile, only 8mm
-
Hochiki CHQ-AB ESP Addressable Beacon
- High Intensity LED technology
- Choice of Red, Amber or Blue lens colour
- Approved by VdS
-
Hochiki Conventional 2 Wire Base In Ivory or White
- Sav-Wire detector mounting base
- Available in Ivory or White
-
Hochiki Conventional Beacon
- High Intensity LED technology
- Colour-matched to existing Ivory and White detector and base ranges
- Fits standard CDX base (YBN-R/6)
-
Hochiki Conventional Sounder Base (Ivory or White)
- Conventional Hochiki sounder base.
- Low current consumption.
- Easy to install.
- Maximum 93 dB(A) @ 1 metre (Tone 1).
- 32 user-selectable tones and 3 user-selectable volumes.
-
Hochiki Conventional Weatherproof 60 Degree Heat Detector in Ivory
- Waterproof design - rated to IP67
- Low profile shape
- Utilises a bi-metallic strip to sense temperature change
- No mounting base required
- No standby current
- Approved by LPCB & VdS
-
Eaton Conventional Enhanced Optical Smoke Detector
- Low profile design
- 360° viewable LED design
- Removable detector chamber for cleaning
-
Eaton Conventional Heat Detector
- Rate of rise, fixed at 77°C or fixed at 92°C models available.
- 360° visibility LED using lightpipe technology.
- Aesthetically pleasing.
- Quick and simple to install.
-
Eaton FXN922 Selectable Multi-Mode Conventional Detector
- 5 modes in 1 detector
- Chamber monitoring and drift compensation dual LED
- ‘Self-Check’ facility
-
Hochiki DCD-AE3M / DCD-CE3M Marine Approved Combined Heat Detector
- Electronic linear heat detection
- Fixed 60°C and 90°C versions available
- Wide voltage range (9.5 ~ 30 V dc)
- Approved by LPCB
- Approved to MED by GL
- GL Type approval
-
Hochiki ESP Addressable Smoke Vent Manual Call Point in Orange with SCI
- Terminals can accommodate up to a 2.5 mm solid conductor
- Orange casing
- Features an integral SCI
- Approved by LPCB to EN54-11:2001
-
Hochiki ESP Short Circuit Isolator Base in Ivory or White
- Features integral SCI
- Compatable with Hochiki ESP sensors
- Available in Ivory or White
-
Hochiki Marine Conventional Photoelectric Smoke Detector
- Removable, high performance chamber.
- Automatic Sensitivity Window Verification (ASWV) – drift compensation technology.
- Remote indicator output.
- Wide voltage range (12 ~ 30 V dc).
- Low profile design with one piece outer cover.
- Single fire LED - 360° viewing.
- Range of mounting bases.
- Approved by LPCB & DNV-GL.
-
Hochiki Sav-Wire Manual Call Point
- Designed for use on “Savwire” (two-wire) systems
- Approved to EN54-11:2001
- Terminals can accommodate up to a 2.5 mm² solid conductor
-
Hochiki YBN-R/6M Marine Approved Standard Base
- Low Profile (only 8mm)
- Quick connections via square cable clamps
- Accepts 2.5 mm cables
- Bayonet slot, low insertion force for detectors
- Approved to MED by GL
- GL Type approval
-
Identifire TriTone Conventional Sounder
- Approved to EN54-3 by UL.
- 96 dB(A) output.
- 6 mA current consumption.
- Low profile and subtle design.
-
Identifire VID Conventional VID Beacon Only
- Very bright VID beacon.
- Ideal for many general signalling applications.
- Can be grid mounted for industrial applications.
- Five different lens colours available.
-
Intelligent Auto-Aligning Beam Detector
- Loop Powered and compatible with XP95, Discovery and CoreProtocol
- Incorporates a bi directional short-circuit isolator
- Automatic drift compensation
- Automatic reset
- Ground level Controller
- Automatic alignment compensation for building movement
- Laser assisted alignment for quick installation
- Allows for 2 detector heads per controller
- Up to 100m range
- Pre-alarm threshold
- EN 54-12 and EN 54-17 certified
-
KAC ENscape Sounder Conventional Sounder Shallow Base Only
- Conventional sounder from KAC.
- Available with low profile or deep mounting base (IP65).
- 32 tones all approved to EN54-3.
-
Klaxon Master Blaster 127dB High Output Sounder
- High output 230V AC siren
- Up to 127 dB
- Available with either 12V trigger
- IP rated for both indoor and outdoor use
-
Klaxon Nexus High Output Conventional Sounder
Key Features
- Three alarm stages (110dB & 120dB variants)
- First-fix, wire to base technology
- IP66 rated
- Volume control for greater flexibility - 20dB
- 64 tones
- Low voltage option
-
Marine Mounting Base for Base Mounted Flame Detector
- Detector locking mechanism
- One way fit
- Contains an earth connector
- Easy to wire
- Contains no electrical parts
- Terminal for remote indicator
-
Marine Series 65 Mounted UV Flame Detector
The Marine Series 65 Base Mounted UV Flame Detector is designed to protect internal areas where flaming fires might be expected, detecting UV radiation that is emitted by flames.
-
Maxitone Addressable Sounder Flasher
- High output
- 16 selectable alarm tones
- Volume control
- Backwards compatible with Zeta Standard Protocol (link)
-
Menvier Surface Manual Callpoint C/W Backbox Optional Weatherproof (CX201, MBG914, FX201)
Key Features
- High visibility status LED
- Standard and weatherproof versions available
- Wide range of accessories
- Heavy duty terminals
- Quick and simple to install
- Fast fit clip on front cover
- Single tool for test and access
-
Morley IAS MI-FHSE-S2 Fixed Heat Detector 58C
- Tri colour LED offering red, green and amber colour
- Rotary decade address switches 0 - 159
- Pure white colour to complement modern buildings
- 100% mechanical and electrical backwards compatibility
- New base design to complement the detector
-
Morley-IAS Addressable Manual Call Point with Optional Short Circuit Isolator
- Addressable manual call point for DX Connexion panel range.
- Optional built-in short circuit isolator.
-
Morley-IAS MI-PSE-S2 Intelligent Optical Smoke Detector
- New mechanical platform with revolutionary chamber offering improved false alarm immunity.
- Tri colour LED offering red, green and amber colours.
- Pure white colour to compliment modern buildings.
-
Nexus Pulse EN Certified High Output Sounder & VAD Beacon
- High output of 105 or 110dB (depeding upon version)
- Conforms to EN54-23
- White or Red flash versions available
- Synchronised Flash
-
Nittan EVC-P Evolution Conventional Optical Detector
- Optical smoken detector from Nittan.
- Omniview 360° LED.
- Internal alarm current limiting resistor.
- Wide operational voltage range (12v-32v).
-
Nittan Evolution Indoor Manual Call Point
- Resettable manual call point for Nittan Evolution protocol
- IP24 rated housing, suitable for indoor applications
- DIL switched addressed
-
Nittan Evolution Outdoor Manual Call Point
- Resettable manual call point for Nittan Evolution protocol
- IP67 rated housing, suitable for outdoor applications
- Backbox has knock-outs and M20 threads for easy fit of cable glands
-
Nittan Evolution Combined Optical Smoke & Heat Detector
- Optical Smoke and 54°C (A1R) Heat Sensors in one housing.
- Evolution FSK protocol.
- EEPROM Addressed (Programmer).
- RIL and Base Control Outputs.