No
Showing 301–350 of 387 results
-
Nittan Evolution Conventional Heat Detector
- 62°C or 92°C conventional heat detector from Nittan.
- Omniview 360° LED.
- Internal alarm current limiting resistor.
- Wide operational voltage range (12v-32v).
-
Nittan EVC-DP Evolution Conventional Dual Optical Detector
- Dual Optical Detector Reduces False Alarms.
- Omniview 360° LED.
- Internal Alarm Current Limiting Resistor.
- Wide Operational Voltage Range (16v-32v).
-
ActiV Conventional Optical Smoke Detector
- High-quality optical smoke detector
- Drift compensation functionality
-
ActiV Conventional Heat Smoke Detector
- Heat Class A1r, A2 & B
- Third-party certified to EN54-5 by Intertek
- Carries the pan-European ‘CertAlarm’ mark
-
ActiV Conventional Multi-Sensor Fire Detector
- Optical + heat multi-sensor
- Drift compensation functionality
-
CXL Universal Call Point
- Choice of Glass or Plastic Elements
- Changeover Contacts
- 470/680 Ohm Resistors
-
KAC Conventional Indoor Manual Call Point
- Unique ‘Plug & Play’ installation concept
- Total ‘Flex-Ability’ in the choice of operating element
-
Nittan Evolution Detector Mounting Base
- Universal mounting base for Nittan Evolution range.
- Optional deeper version for surface cable.
-
Nittan Evolution Detector Mounting Base with SCI Shorting Link
- Includes a shorting link to allow loop continuity testing
- Allows for ease of installation cable testing
- Low profile
-
Nittan Evolution Detector Mounting Base With Short Circuit Isolator
- Low Profile Base design.
- -ve Line Isolator.
- Low quiescent current.
- Self resetting when fault clears.
-
Nittan Evolution DIN Rail Mounting Circuit Isolator
- Low Profile Base design.
- -ve Line Isolator.
- Low quiescent current.
- Self resetting when fault clears.
-
Nittan Evolution Dual Optical With Heat Detector
- Dual Optical Technology Plus Heat Sensor Reduces False Alarms
- Evolution FSK protocol
- EEPROM Addressed (Programmer)
- RIL and Base Control Outputs
-
Nittan Evolution EV-AV2 Addressable Sounder Beacon or Sounder Beacon Base
- Available as Standalone Sounder Beacon or Sounder Beacon Base
- Evolution FSK Protocol.
- EEPROM Addressed (Programmer)
- 12 Tones DIP Switch Selected (3 Approved Tones)
-
-
Nittan Evolution EV-SDR Addressable Sounder or Sounder Base
- Available as standalone sounder or sounder base
- 12 tones DIP switch selected (3 approved tones)
- Replaces EV-ABS sounder
-
Nittan Evolution Heat Detector
- Option Of A1R (54°C) or CS (92°C) Classification Heat Detector.
- Evolution FSK protocol.
- EEPROM Addressed (Programmer).
- RIL and Base Control Outputs.
-
Nittan Evolution High Output Beacon
- High output beacon
- IP65 waterproof rating
- Integral short circuit isolator
-
Nittan Evolution High Output Sounder
- High output sounder
- IP65 waterproof rating
- Integral short circuit isolator
-
Nittan Evolution High Output Sounder Beacon
- High output sounder beacon
- IP65 waterproof rating
- Integral short circuit isolator
-
Nittan Evolution Optical Detector With Optional Built In Sounder
- Optical Detector
- Optional Integrated Sounder
- Evolution FSK protocol
-
Nittan Sensortec Addressable Optical Detector
- Optical smoke detector for Nittan Sensortec systems.
- Latest generation Nittan optical chamber.
- Omniview 360° LED.
- Robust fully modulated AS communications protocol.
-
Nittan UB-4 Standard Detector Base
- Nittan 4 Terminal Standard Detector Base.
- Low Profile Detector Base.
-
Notifier NFXI-OPT Opal Addressable Smoke Detector
- Built in short circuit isolation.
- New advanced Opal protocol allows mapping of the loop for precise fault location using isolators.
- Tri colour LED offering red, green and amber colours.
- Rotary decade address switches.
-
Notifier OPAL NFXI Thermal Heat Addressable Detector
- Advanced thermal sensing
- Fixed temperature and rate of rise versions available
- Short circuit isolation
- Panel controllable
-
Apollo Orbis Conventional Heat Detector
- Wide range of heat detector classes for various conditions
- Rate-of-rise and static temperature detection capabilities
- Open-web casing for improved air flow and temperature measurement
-
Orbis Marine Heat Detector
The Orbis Marine Heat Detector uses a single thermistor to sense the temperature around the detector. We have 6 detectors available from the Orbis Marine range designed to suit a variety of operating conditions.
-
Orbis Marine Multisensor Detector
- Approved for use in marine environments
- Transient rejection for false alarm reduction
- Modern, low-profile design
- Responds well to fast-burning, flaming fires
- Good performance in both black and white smoke
- DirtAlert, warns service engineers via a flashing yellow LED that detectors need maintenance
- FasTest - a maintenance procedure that takes just four seconds to test detectors
- SensAlert - a yellow flashing LED indicates faulty operation
- High humidity tolerance at up to 90% RH
- Wider operating temperature -40°C to +70°C
-
Orbis Marine Optical Smoke Detector
- Approved for use in marine environments
- Transient rejection for false alarm reduction
- Modern, low-profile design
- Responds well to slow-burning fires
- Good performance in both black and white smoke
- DirtAlert - warns service engineers via a flashing yellow LED that detectors need maintenance
- FasTest - a maintenance procedure that takes just four seconds to test detectors
- SensAlert - a yellow flashing LED indicates faulty operation
- High humidity tolerance at up to 90% RH
- Wide operating temperature -40°C to +70°C
-
Orbis Marine Relay Base
The Orbis Marine Relay Base incorporates a single-pole voltage-free changeover contact for switching ancillary equipment. When the detector changes to the alarm state, the relay is energised, causing the contact to change state -
Orbis Marine TimeSaver Base
The Orbis Marine TimeSaver Base is a design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedure. -
Apollo Orbis Conventional Multisensor Detector
- Responds well to fast-burning, flaming fires
- Transient rejection algorithms reduce false alarms
- Automatic drift compensation with DirtAlert™
-
Apollo Orbis TimeSaver Continuity Switch Base
- Facilitates continuity testing for enhanced reliability
- Quick and efficient installation process
- Compatible with Orbis fire detection systems
-
Rotary Fire Alarm Bell
Rotary Fire Alarm Bell
With a tried and tested robust design, this hand operated fire bell is suitable for use in hazardous locations or areas without a power supply. The bell has a pre-drilled flange for easy fitting, an aluminium base plate and red dome.
- Suitable for internal and external use
- Sound output: 60dB at up to 35m
- Quick and simple to install
-
-
Solista LX – Wall Fire Visual Alarm Device (VAD)
- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.
-
Solista LX Conventional Ceiling Mounted VAD
- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.
-
Sonos Conventional Sounder & LED Beacon
- Low current LED beacon.
- Simple ‘First Fix’ installation.
- Weatherproof to IP65 (deep base units).
- Choice of lens colours.
- Sounder and beacon can be controlled separately.
- Tone and volume can be preset or adjusted off-base - 20dB.
- Separate connections for sounder & beacon.
-
Sonos Conventional Sounder in Red or White
- Wide voltage range.
- Simple ‘First Fix’ installation.
- 32 tones.
- Tone and volume can be preset or adjusted off-base.
- Weatherproof to IP65 (deep base units).
- Synchronised alarm tones.
- Volume control - 20dB.
-
Sonos High Power 5J Xenon Beacon
- High output 5J xenon beacon
- 10-60V DC or 110/230V AC
- Simple ‘First Fix’ installation
-
Sonos LED Beacon
- High efficiency LED beacon consumes less than 5mA.
- Simple ‘First Fix’ installation (no second fix wiring).
- Weatherproof to IP65 (deep base units).
- Synchronised flash.
-
Sonos Open Area Beacon with Isolator
- For use with XP95 & Discovery systems
- Self-test fault monitoring
- IP65 rated
- Individual and group addressing
- Sycronisation of flashes
- Comes with Isolating Base as standard
- Loop-powered
- Red and clear lens options
-
Sonos Pulse Ceiling Mounted EN Certified VAD Beacon With Optional Sounder
- Ceiling mounted Visual Alarm Device
- Conforms to EN54-23
- White or Red flash versions available
- Available with optional Sounder
- Synchronised Flash
-
Sonos Pulse Wall Mounted VAD
- EN54-23 VAD
- White or Red flash versions available
- Synchronised Flash
-
Sonos Pulse Wall Mounted VAD Beacon with Sounder
- EN54-23 VAD
- White or Red flash versions available
- Includes integral sounder
-
Soteria SA5000-400 Heat Detector
- Soteria heat detectors with heat clasifications A1R, A2R, A2S, BR, BS, CR or CS.
- Simple installation with a new easy-fit base and an isolator located in the head.
- PureLight® technology.
- A sleek and stylish low-profile or flush design.
- Compatible with XP95 & Discovery protocols.
- Comprehensively tested to exceed EN54 standards.
- Extensively tested at Apollo’s state of the art in-house testing facilities.
-
Apollo Soteria Dimension Optical Smoke Detector
- Low profile design
- Utilises digital CoreProtocol communications
- Compatible with Discovery and XP95 systems*
- Integrated switchable isolator as standard
-
Soteria SA5000-600 Optical Smoke Detector
- Enhanced reliability of smoke detection.
- Reduction in false alarms.
- Simple installation with a new easy-fit base and an isolator located in the head.
- PureLight® technology.
- A sleek and stylish low-profile or flush design.
- Compatible with XP95 & Discovery protocols.
- Comprehensively tested to exceed EN54 standards.
- Extensively tested at Apollo’s state of the art in-house testing facilities.
-
StroBell Combined Fire Alarm Bell With White LED Beacon
- Utilises market-leading bell design
- Ultra bright strobe in clear lens for maximum light output
- Single point of installation minimises wiring and associated costs
-
System Sensor 22051TE-26 Low Profile Addressable Multi-Sensor
- System Sensor two sensor multi-criteria fire detector incorporating photoelectric and thermal sensing elements.
- New mechanical platform with revolutionary chamber.
-
System Sensor Smoke, Thermal & IR Multi-Criteria Addressable Smoke Detector
- Incorporates photoelectric, thermal, and IR sensing elements for comprehensive fire detection
- Utilises the Series 200 Advanced Protocol, which supports enhanced control and configurability
- Features red, green, and amber LEDs to provide clear and distinct visual status indications