No
Showing 51–100 of 126 results
-
Fyreye MKII Sandwich Sounder & Flasher Base
- Sandwich design between base and detector
- 16 selectable international alarm tones
- Individual or group triggering capability
-
Xtratone MKII Addressable Sounder
- Indoor MKII addressable sounder compatible with Zeta control panels
- 102dB @ 1m sound output
- Available in Red or White
-
Xtratone MKII Addressable Sounder & Wall VAD
- Combined sounder and VAD in single unit
- 100dB sound output at 1 metre
- Hard or soft addressable capability
-
Raptor MKII Addressable Weatherproof Sounder
- IP65 weatherproof sounder
- 16 Tone patterns (site selectable)
- Available in red or white
-
Raptor MKII Addressable Weatherproof Sounder & Beacon
- IP65 weatherproof sounder/beacon
- Flashing rate 0.33Hz - 1.5Hz
- Available in red or white
-
C-Tec BF431A/CX/W Addressable XP95 Compatible 96dB Base Sounder
- Impressive 96dB(A) sound output @ 1m.
- Supplied with a BF431QCP quick connect plate and detector spur wires.
- Onboard short-circuit loop isolator.
-
CAST Detector Base
- The CA408 is third-party LPCB certified to the relevant parts of EN54 standards
- It offers a simple "click and twist" design for easy installation and can be ceiling-mounted in any orientation
- The base is also compatible with C-TEC's CAST protocol sounder VADs and can connect to a remote LED indicator
-
C-TEC Surface Mounting No Break Fire Call Point
- Cable termination: 5-2.5mm 2
- Maximum voltage: 30Vd.c
- Current rating: 2 Amps
- IP rating: IP24D
- Material: PC/ABS
- Weight: 160g
- Dimensions: 89x93x59mm
- Colour: Red
-
Hochiki Intrinsically Safe Conventional Call Point
- Supports either a ‘Frangible’ glass element or a ‘Non Frangible’ plastic element
- Rugged design with ATEX classification
- SIL Level 2 approved variant available
-
Discovery Marine Manual Call Point
- Flashing LED option to indicate polling (Discovery systems only)
- ‘Plug and Play’ terminal connections for fast wiring
- Continuity link for wiring test before commissioning
- Reports an alarm in under 0.2 seconds
- Resettable element
-
Eaton BiWire Ultra Manual Call Point
- Robust Construction
- Fast Fit Clip on Front Cover
- IP22 and IP66 Options
- Compatible with BiWire Accessories
-
Eaton CAB300 Intelligent Addressable Standard Base
- First fix base.
- Loop integrity switch.
- Multiple cable entry points.
-
-
Hochiki YBO-BS Addressable Base Sounder (Ivory or White)
- Loop Powered with Single Loop Address
- Variable Sound Output 50 ~ 98 dB(A) (+/-2 dB(A)) output at 1 metre
- 51 User-Selectable Tones (all tones EN54-3 compatible)
-
Hochiki YBO-BSB2 ESP Addressable Base Sounder Beacon
- Hochiki ESP combined base sounder & VAD beacon.
- Variable Sound Output 50 ~ 98 dB(A) output at 1 metre.
- 'O' Rated Beacon to EN54-23.
- Available with Red or White LEDs.
- Available with White or Ivory case.
-
Apollo XP95 Integrated Base Sounder
- Two volume ranges 55-75dB(A) and 75-91dB(A)
- Individual and group addressing
- Optional built-in isolator
-
Apollo XP95 Integrated Sounder & Beacon Base
- Two volume ranges
- Beacon flash rate
- Unique self-test functions
-
Hochiki CHQ-WS2 ESP Addressable Wall Sounder in Red or White
- Loop powered adderssabel Hochiki sounder
- 51 User-Selectable Tones
- Available in Red or White
-
Hochiki CHQ-WSB2 ESP Addressable Wall Sounder Beacon in Red or White
- Single Loop Address - addressed via the TCH-B200 Hand Held Programmer.
- Variable Sound Output 90 ~ 102 dB(A) (±2 dB(A)) output at 1 metre.
- Sounder and Beacon can operated independently*1.
- ‘O’ Rated Beacon to EN54-23.
- Available with Red or White LEDs.
- Available with Red or White case.
- Weatherproof Kit available.
-
Apollo XP95 Intelligent Open-Area Sounder
- Three selectable tones
- Two volume settings
- Tone and flash synchronisation
-
Hochiki CHQ-WB Addressable Loop Powered Wall Beacon VAD
- Wall mouted certified VAD.
- Loop powered.
- Choice of 2 LED colours (red or white).
- Choice of 3 case colours (white, ivory or red).
-
Hochiki CHQ-CB Addressable Loop Powered Ceiling VAD
- Ceiling mouted certified VAD.
- Loop powered.
- Choice of 2 LED colours (red or white).
- Choice of 3 case colours (white, ivory or red).
-
Fike Twinflex Manual Call Point With Optional Cover
- Resettable front element
- Indoor and outdoor versions available
- Inbuilt selectable end of line
-
Fike Sita Addressable Combined Sounder & Beacon in Red
- Standalone combined sounder & beaon for Fike Sita addressable systems.
- Output of 88dB.
- Choice of low profile or deep mouting bases.
-
Fike Sita Addressable Weatherproof Beacon in Red
- Weatherproof beaon for Fike Sita addressable systems
- Supplied complete with back box and glands to suit surface cabling
-
Fike Sita Addressable Sound Point Sounder in Red or White
- Standalone sounder for Fike Sita addressable systems
- Output of 90dB
- Available in red or white housing
-
Fike Sita Addressable Hi-Point Sounder in Red
- Standalone horn sounder for Fike Sita addressable systems
- Suitable for indoor (IP21) and outdoor (IP55) applications
- Output of 87dB
-
Fike Sita ASD Detector Mounting Base, Pack of 5
- Mounting bases for the Fike Sita ASD addressable detectors.
- Sold in packs of 5.
-
Fyreye MKII 12V Auto Reset Relay Base
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Fyreye Relay Base
The Relay base is mainly used on 12V security systems to signal detector operation to the panel. They can also be used on 24V fire systems where the activation of a particular detector requires a signal to nearby equipment (door holders for example).
-
Gent ES Detect Conventional Standard Base With or Without Diode
- Standard base for ES Detector conventional Gent detectors.
- Available with optional diode.
-
Gent Indoor Conventional Manual Call Point
- Fully compliant with EN54, Part 11.
- Choice of re-settable or glass operating element option.
- Semi-flush or surface mounting.
- 470 Ohm resistor.
-
Gent Weatherproof Conventional Manual Call Point
- Fully compliant with EN54, Part 11.
- Glass operating element.
- Weather proof IP67.
- Supplied with surface mount back box.
-
GST DB-01D Common Conventional Detector Diode Base
- Common for all GST DC series detectors.
- Supports detectors locking to prevent unauthorised removal.
- Easy to install with standard mounting options.
-
Hochiki CDX Conventional Mounting Base
- Integral remote indicator output
- Low profile, only 8 mm
- Rugged design and electronics free
-
Hochiki Conventional Schottky Diode Base in Ivory or White
- Integral remote indicator output
- In-line Schottky Diode for line continuity
- Low profile, only 8mm
-
Hochiki CHQ-AB ESP Addressable Beacon
- High Intensity LED technology
- Choice of Red, Amber or Blue lens colour
- Approved by VdS
-
Hochiki Conventional 2 Wire Base In Ivory or White
- Sav-Wire detector mounting base
- Available in Ivory or White
-
Hochiki Sav-Wire Manual Call Point
- Designed for use on “Savwire” (two-wire) systems
- Approved to EN54-11:2001
- Terminals can accommodate up to a 2.5 mm² solid conductor
-
Hochiki YBN-R/6M Marine Approved Standard Base
- Low Profile (only 8mm)
- Quick connections via square cable clamps
- Accepts 2.5 mm cables
- Bayonet slot, low insertion force for detectors
- Approved to MED by GL
- GL Type approval
-
Marine Mounting Base for Base Mounted Flame Detector
- Detector locking mechanism
- One way fit
- Contains an earth connector
- Easy to wire
- Contains no electrical parts
- Terminal for remote indicator
-
Maxitone Addressable Sounder Flasher
- High output
- 16 selectable alarm tones
- Volume control
- Backwards compatible with Zeta Standard Protocol (link)
-
Menvier Surface Manual Callpoint C/W Backbox Optional Weatherproof (CX201, MBG914, FX201)
Key Features
- High visibility status LED
- Standard and weatherproof versions available
- Wide range of accessories
- Heavy duty terminals
- Quick and simple to install
- Fast fit clip on front cover
- Single tool for test and access
-
Morley-IAS Addressable Manual Call Point with Optional Short Circuit Isolator
- Addressable manual call point for DX Connexion panel range.
- Optional built-in short circuit isolator.
-
Nittan Evolution Indoor Manual Call Point
- Resettable manual call point for Nittan Evolution protocol
- IP24 rated housing, suitable for indoor applications
- DIL switched addressed
-
Nittan Evolution Outdoor Manual Call Point
- Resettable manual call point for Nittan Evolution protocol
- IP67 rated housing, suitable for outdoor applications
- Backbox has knock-outs and M20 threads for easy fit of cable glands
-
CXL Universal Call Point
- Choice of Glass or Plastic Elements
- Changeover Contacts
- 470/680 Ohm Resistors
-
KAC Conventional Indoor Manual Call Point
- Unique ‘Plug & Play’ installation concept
- Total ‘Flex-Ability’ in the choice of operating element
-
Nittan Evolution Detector Mounting Base
- Universal mounting base for Nittan Evolution range.
- Optional deeper version for surface cable.
-
Nittan Evolution EV-AV2 Addressable Sounder Beacon or Sounder Beacon Base
- Available as Standalone Sounder Beacon or Sounder Beacon Base
- Evolution FSK Protocol.
- EEPROM Addressed (Programmer)
- 12 Tones DIP Switch Selected (3 Approved Tones)