No
Showing 101–126 of 126 results
-
Nittan Evolution EV-SDR Addressable Sounder or Sounder Base
- Available as standalone sounder or sounder base
- 12 tones DIP switch selected (3 approved tones)
- Replaces EV-ABS sounder
-
Nittan Evolution High Output Sounder
- High output sounder
- IP65 waterproof rating
- Integral short circuit isolator
-
Nittan Evolution High Output Sounder Beacon
- High output sounder beacon
- IP65 waterproof rating
- Integral short circuit isolator
-
Nittan UB-4 Standard Detector Base
- Nittan 4 Terminal Standard Detector Base.
- Low Profile Detector Base.
-
Orbis Intrinsically Safe (IS) TimeSaver Base
- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Continuity link for zone testing
- Detector locking mechanism
-
Orbis Marine Relay Base
The Orbis Marine Relay Base incorporates a single-pole voltage-free changeover contact for switching ancillary equipment. When the detector changes to the alarm state, the relay is energised, causing the contact to change state -
Orbis Marine TimeSaver Base
The Orbis Marine TimeSaver Base is a design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedure. -
Apollo Orbis TimeSaver Continuity Switch Base
- Facilitates continuity testing for enhanced reliability
- Quick and efficient installation process
- Compatible with Orbis fire detection systems
-
System Sensor Addressable Indoor Manual Call Point
- Addressable System Sensor MCP
- Suitable for indoor applications
- Resettable element
- No short-circuit isolator
-
System Sensor B501AP Addressable Mounting Base
- System Sensor addressble sensor base with SEMS screw connections and address identification label.
-
System Sensor BSO-PP-N00 & I00 Addressable Base Sounder with Optional Isolator
- Addressable base sounder for System Sensor protocol.
- Available with optional short-circuit isolator.
-
System Sensor DSS-PC-N00 & I00 Addressable Base Sounder & VAD with Optional Isolator
- High output LED technology ensures optimum light output and low power requirements.
- High efficiency piezo disk and horn profile generate powerful sound output.
- Features Advanced protocol controllable sound output, tone selection, group polling, independent sound or strobe function
- Automatic synchronization of sounder and strobe
- Large cable access
- Rear or surface cable entry
- Loop continuity spring
- Simple twist fit onto universal B501AP base (positive “poke yoke” engagement)
- Anti-tamper feature
- In-built isolation options
- Address tag for clear indication
- Single point of installation – saves time, cost & inventory
- Low current draw enables more devices on loop
- Adjustable volume control (on device or from panel)
- Rotary wheels for clear address indication
- Clear lens with red flash
-
XP95 Category W EN 54-23 Visual Alarm Device with Red or White Body
- Uses high intensity LED (white flash only).
- EN 54-23 Compliant Category W. VAD.
- Coverage W-2.4-6.
- Automatic LED check when VAD activated.
-
Apollo XPERT 8 Intelligent Mounting Base
- Compatible with Soteria, Discovery and XP95 detectors
- Isolated and non-isolated devices supported
- ‘E-Z Fit’ allows for simple mounting of the detector base
-
YBN-R/3 Hochiki ESP Sensor Mounting Base in Ivory, White or Black
- Common mounting base for Hochiki ESP range of detectors
- Available in Ivory, White or Black
-
YBO-R/3 Hochiki ESP Sounder Mounting Base
- Hochiki ESP sounder base
- Available in Red or White
-
Zeta CP3 Conventional Manual Call Point
- EN54-11 approved conventional manual call point
- Surface mounted (includes back box) or flush mounted with optional bezel
- Positive activation that mimics the feel of breaking glass
- Simple key to reset operating element - no broken glass
-
Zeta CP4 Conventional Manual Call Point
- Very high visibility of the alarm condition
- High impact resistant ABS glass fiber material Fully patented
- Quick and easy installation
-
Ziton Addressable Base Sounder in Polar White
- Detector and sounder from a single wiring point – minimising installation costs
- Powered directly from the ZP loop
- Up to 60 detectors with sounders directly on the loop
- Separate addresses selectable for detector and sounder
- High efficiency sound gun transducer
- Compatible with all ZP loop devices
- Laser alignment aid in the receiver head
- Wide range of international sound types and frequencies
- EN54:3 approved and CPR certified
-
Ziton SPB-2 Addressable Sounder Base in Red or White
- Pluggable base for ZP755 sounder.
- First fix facility.
- Ease of installation.
- Large wiring terminals.
-
Ziton SPB-2P Plugable Base for ZP755 Sounder in White
- Ease of installation
- First fix facility
- Large wiring terinals
-
Ziton ZP7 Weatherproof Addressable Manual Call Point
- IP67 rating for outdoor applications
- Resettable or frangible operating elements
- Single maintenance tool
- Plug in loop connection
-
Ziton ZP7-SB1-P Standard Base for ZP7 Detectors
- Common to all ZP7 series detectors.
- Automatic locking option.
- Address identification label.
- Easy to install.
-
Ziton ZP755HA-2 Addressable Horn Sounder in Red or White
- Wide 'all around' sound distribution.
- Microphone self test facility.
- Plug in base – no direct wiring connections.
- Up to 50 sounders directly on the loop wiring.
-
Ziton ZP886R ZP7 Series Intelligent Addressable Manual Call Point
- Reliable single action manual call point for surface and flush mounting
- Dual, tri-colour status indicators offers 180° alarm visibility
- Tamper resistant design with resettable or frangible element
-
Ziton ZP888R ZP7 Series Intelligent Addressable Manual Call Point – Weatherproof
- Reliable single action manual call point for surface mounting
- A dual, tri-colour status indicator offers 180° alarm visibility
- Tamper resistant design with resettable or frangible element
- Outdoor rated, waterproof enclosure