Conventional
Showing 101–145 of 145 results
-
IS FlashDome Intrinsically Safe Beacon
- Intrinsic safe certified beacon.
- Suitable for zones 0, 1 or 2.
- IP66 rated.
-
KAC ENscape Sounder Conventional Sounder Shallow Base Only
- Conventional sounder from KAC.
- Available with low profile or deep mounting base (IP65).
- 32 tones all approved to EN54-3.
-
Klaxon Master Blaster 127dB High Output Sounder
- High output 230V AC siren
- Up to 127 dB
- Available with either 12V trigger
- IP rated for both indoor and outdoor use
-
Klaxon Nexus High Output Conventional Sounder
Key Features
- Three alarm stages (110dB & 120dB variants)
- First-fix, wire to base technology
- IP66 rated
- Volume control for greater flexibility - 20dB
- 64 tones
- Low voltage option
-
Marine Mounting Base for Base Mounted Flame Detector
- Detector locking mechanism
- One way fit
- Contains an earth connector
- Easy to wire
- Contains no electrical parts
- Terminal for remote indicator
-
Marine Series 65 Mounted UV Flame Detector
The Marine Series 65 Base Mounted UV Flame Detector is designed to protect internal areas where flaming fires might be expected, detecting UV radiation that is emitted by flames.
-
Menvier Surface Manual Callpoint C/W Backbox Optional Weatherproof (CX201, MBG914, FX201)
Key Features
- High visibility status LED
- Standard and weatherproof versions available
- Wide range of accessories
- Heavy duty terminals
- Quick and simple to install
- Fast fit clip on front cover
- Single tool for test and access
-
Nexus Pulse EN Certified High Output Sounder & VAD Beacon
- High output of 105 or 110dB (depeding upon version)
- Conforms to EN54-23
- White or Red flash versions available
- Synchronised Flash
-
Nittan EVC-P Evolution Conventional Optical Detector
- Optical smoken detector from Nittan.
- Omniview 360° LED.
- Internal alarm current limiting resistor.
- Wide operational voltage range (12v-32v).
-
Nittan Evolution Conventional Heat Detector
- 62°C or 92°C conventional heat detector from Nittan.
- Omniview 360° LED.
- Internal alarm current limiting resistor.
- Wide operational voltage range (12v-32v).
-
Nittan EVC-DP Evolution Conventional Dual Optical Detector
- Dual Optical Detector Reduces False Alarms.
- Omniview 360° LED.
- Internal Alarm Current Limiting Resistor.
- Wide Operational Voltage Range (16v-32v).
-
ActiV Conventional Optical Smoke Detector
- High-quality optical smoke detector
- Drift compensation functionality
-
ActiV Conventional Heat Smoke Detector
- Heat Class A1r, A2 & B
- Third-party certified to EN54-5 by Intertek
- Carries the pan-European ‘CertAlarm’ mark
-
ActiV Conventional Multi-Sensor Fire Detector
- Optical + heat multi-sensor
- Drift compensation functionality
-
CXL Universal Call Point
- Choice of Glass or Plastic Elements
- Changeover Contacts
- 470/680 Ohm Resistors
-
KAC Conventional Indoor Manual Call Point
- Unique ‘Plug & Play’ installation concept
- Total ‘Flex-Ability’ in the choice of operating element
-
Apollo Orbis Conventional Heat Detector
- Wide range of heat detector classes for various conditions
- Rate-of-rise and static temperature detection capabilities
- Open-web casing for improved air flow and temperature measurement
-
Orbis Intrinsically Safe (IS) TimeSaver Base
- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Continuity link for zone testing
- Detector locking mechanism
-
Orbis Marine Heat Detector
The Orbis Marine Heat Detector uses a single thermistor to sense the temperature around the detector. We have 6 detectors available from the Orbis Marine range designed to suit a variety of operating conditions.
-
Orbis Marine Multisensor Detector
- Approved for use in marine environments
- Transient rejection for false alarm reduction
- Modern, low-profile design
- Responds well to fast-burning, flaming fires
- Good performance in both black and white smoke
- DirtAlert, warns service engineers via a flashing yellow LED that detectors need maintenance
- FasTest - a maintenance procedure that takes just four seconds to test detectors
- SensAlert - a yellow flashing LED indicates faulty operation
- High humidity tolerance at up to 90% RH
- Wider operating temperature -40°C to +70°C
-
Orbis Marine Optical Smoke Detector
- Approved for use in marine environments
- Transient rejection for false alarm reduction
- Modern, low-profile design
- Responds well to slow-burning fires
- Good performance in both black and white smoke
- DirtAlert - warns service engineers via a flashing yellow LED that detectors need maintenance
- FasTest - a maintenance procedure that takes just four seconds to test detectors
- SensAlert - a yellow flashing LED indicates faulty operation
- High humidity tolerance at up to 90% RH
- Wide operating temperature -40°C to +70°C
-
Orbis Marine Relay Base
The Orbis Marine Relay Base incorporates a single-pole voltage-free changeover contact for switching ancillary equipment. When the detector changes to the alarm state, the relay is energised, causing the contact to change state -
Orbis Marine TimeSaver Base
The Orbis Marine TimeSaver Base is a design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedure. -
Apollo Orbis Conventional Multisensor Detector
- Responds well to fast-burning, flaming fires
- Transient rejection algorithms reduce false alarms
- Automatic drift compensation with DirtAlert™
-
Apollo Orbis TimeSaver Continuity Switch Base
- Facilitates continuity testing for enhanced reliability
- Quick and efficient installation process
- Compatible with Orbis fire detection systems
-
Rotary Fire Alarm Bell
Rotary Fire Alarm Bell
With a tried and tested robust design, this hand operated fire bell is suitable for use in hazardous locations or areas without a power supply. The bell has a pre-drilled flange for easy fitting, an aluminium base plate and red dome.
- Suitable for internal and external use
- Sound output: 60dB at up to 35m
- Quick and simple to install
-
Solista LX – Wall Fire Visual Alarm Device (VAD)
- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.
-
Solista LX Conventional Ceiling Mounted VAD
- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.
-
Sonos Conventional Sounder & LED Beacon
- Low current LED beacon.
- Simple ‘First Fix’ installation.
- Weatherproof to IP65 (deep base units).
- Choice of lens colours.
- Sounder and beacon can be controlled separately.
- Tone and volume can be preset or adjusted off-base - 20dB.
- Separate connections for sounder & beacon.
-
Sonos Conventional Sounder in Red or White
- Wide voltage range.
- Simple ‘First Fix’ installation.
- 32 tones.
- Tone and volume can be preset or adjusted off-base.
- Weatherproof to IP65 (deep base units).
- Synchronised alarm tones.
- Volume control - 20dB.
-
Sonos High Power 5J Xenon Beacon
- High output 5J xenon beacon
- 10-60V DC or 110/230V AC
- Simple ‘First Fix’ installation
-
Sonos LED Beacon
- High efficiency LED beacon consumes less than 5mA.
- Simple ‘First Fix’ installation (no second fix wiring).
- Weatherproof to IP65 (deep base units).
- Synchronised flash.
-
Sonos Pulse Ceiling Mounted EN Certified VAD Beacon With Optional Sounder
- Ceiling mounted Visual Alarm Device
- Conforms to EN54-23
- White or Red flash versions available
- Available with optional Sounder
- Synchronised Flash
-
Sonos Pulse Wall Mounted VAD
- EN54-23 VAD
- White or Red flash versions available
- Synchronised Flash
-
Sonos Pulse Wall Mounted VAD Beacon with Sounder
- EN54-23 VAD
- White or Red flash versions available
- Includes integral sounder
-
StroBell Combined Fire Alarm Bell With White LED Beacon
- Utilises market-leading bell design
- Ultra bright strobe in clear lens for maximum light output
- Single point of installation minimises wiring and associated costs
-
Syrex Intrinsically Safe Sounder Beacon
- Sounder Only, Beacon Only and Sounder Beacon Options Available
- Rated for Category 1
- Choice of Lens Options
- Weatherproof to IP65
-
Vimpex Identifire IDBTS Base Sounder with Cover
- Slimmest profile in the industry
- 32 user-selectable tones
- EN 54-3 tested and fully approved
-
VXB & VTB Conventional Visual Alarm Device with Optional Sounder
- Approved to EN54-3(Sounder) and EN54-23(VAD Beacon).
- White flash(C-2.4-8), red flash (C-2.4-7) options available.
- 32 selectable tones.
- Body colour options available – red or white.
- Deep base variants independently certified to IP65.
-
Xtratone Conventional Combined Wall Sounder Beacon
- Complies with EN54 Part 3 Type A
- 102dB @ 1m sound output
- 22 Tone patterns (site selectable)
- Flush or surface fixing
- Housed in UL V0 flame retardant ABS
- 4 x 20mm cable entries (2 top, 2 bottom)
- First fix, wire to back box technology
- Flashing Rate 0.5Hz
-
Zeta CP3 Conventional Manual Call Point
- EN54-11 approved conventional manual call point
- Surface mounted (includes back box) or flush mounted with optional bezel
- Positive activation that mimics the feel of breaking glass
- Simple key to reset operating element - no broken glass
-
Zeta CP4 Conventional Manual Call Point
- Very high visibility of the alarm condition
- High impact resistant ABS glass fiber material Fully patented
- Quick and easy installation
-
Roshni Low Profile (RoLP) Conventional Fire Alarm Sounder
- 102dB(A) sound output
- 32 tones (user selectable)
- Optional deep base
- Two stage alarm
- Automatic synchronisation
-
Zeta Securetone 2 Conventional Beacon
- Low consumption conventional beacon
- Low profile platform design which can be used standalone or with a detector
-
Ziton Z600 Series Conventional Heat Detector
- Aproved to EN54 Parts 5 and CPD Certified
- Low profile conventional design
- Head out continuity support
- Range of surface bases
- Plug in base with automatic locking