Conventional
Showing 51–100 of 145 results
-
C-Tec ActiV 96dB Conventional Base Sounder
- Third-party certified to EN54-3 (Sounders)
- Impressive 96dB(A) sound output @ 1m
- 31 selectable primary and secondary tone pairs and two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA
- Alarm Current at 18Vdc = 3.8mA
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use
- Supplied with a BF431QCP quick connect plate and detector spur wires
- IP21C rated
-
C-Tec ActiV Conventional Base Sounder VAD (C-3-8.5)
- Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs)
- Provides 'C-3-8.5' light distribution (min 0.4 lux over a 3 x 8.5m cylindrical area)
- Impressive 96dB(A) sound output @ 1m
- Includes 31 selectable primary tones and an optional secondary tone
- Two volume levels (high and low)
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
- Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use
- Supplied with a BF431QCP quick connect plate and detector spur wires
- IP21C rated
-
C-TEC Surface Mounting No Break Fire Call Point
- Cable termination: 5-2.5mm 2
- Maximum voltage: 30Vd.c
- Current rating: 2 Amps
- IP rating: IP24D
- Material: PC/ABS
- Weight: 160g
- Dimensions: 89x93x59mm
- Colour: Red
-
Hochiki Intrinsically Safe Conventional Call Point
- Supports either a ‘Frangible’ glass element or a ‘Non Frangible’ plastic element
- Rugged design with ATEX classification
- SIL Level 2 approved variant available
-
ClamBell EN54-3 Approved Fire Alarm Bell
- Permanently fitted gong.
- Specifically designed weatherproof back box.
- Slick and modern looking.
- Fully customised pad printed branding.
- Strobell EN-23 VAD option which integrates ClamBell and VAD for unique combined unit will be available soon.
-
Conventional Raptor Sounder Beacon White Flasher
- Complies with EN54 Pt 3 Type B & EN54 Pt 23.
- 107dB +/- 3dB @ 1m sound output.
- 22 Tone patterns (site selectable).
- Suitable for surface mounting only.
- Housed in UL V0 flame retardant ABS.
- 3 x 20mm cable entries (2 top, 1 bottom).
- First fix, wire to back box technology.
- IP65 Rating.
- Flashing rate 0.5Hz
-
Conventional Raptor Weatherproof Sounder
- Complies with EN54 Part 3 Type B.
- 107dB +/- 3dB @ 1m sound output.
- 22 Tone patterns (site selectable).
- Suitable for surface mounting only.
- Housed in UL V0 flame retardant ABS.
- 3 x 20mm cable entries (2 top, 1 bottom).
- First fix, wire to back box technology.
- IP65 Rating.
-
Conventional Symphoni LX Wall Sounder Beacons
- Ultra low current consumption.
- Up to 7.5m coverage volume (switchable to 2.5m).
- Coverage switch to 2.5m.
- Available as weatherproof (IP66) version.
-
Cranford Controls VocAlarm Voice Enhanced Sounder
- High quality digitised voice messaging with crystal oscillator synchronisation
- Extensive message library with over 30 options for fire, security and automation
- Single or dual message models with IP65 weatherproof rating
-
Cranford Controls VTB Spatial Sounder & Beacon
- 32 tones plus a selectable override tone.
- Shallow base IP43 and deep base IP65 versions available.
- Switch selectable beacon only feature.
- Unique twist and lock bayonet mounting system.
-
Cranford Controls VTG 24V Spatial Wall Sounder
Key Features
- Fully approved to EN54-3 by LPCB and VdS.
- 32 tones plus a selectable override tone.
- Shallow base IP21C and deep base IP33C versions available.
- Designed to work with both conventional and two-wire (SAV-WIRE ) systems.
- Unique twist and lock bayonet mounting system.
- Removable cover on deep base for surface wiring.
- Features base locking system as standard.
-
Eaton Base Sounder VAD
- Certified to latest standard EN 54-23
- First fix base
- Fixing platform for most popular detectors
- Tamper proof cap for standalone use (supplied separately)
- For use with or without a detector
-
-
Fulleon Askari Compact Conventional Sounder in Red or White
- 32 tones (user selectable)
- Automatic synchronisation
- Two stage alarm
- Discrete design
- Available in Red or White
-
Fulleon Flashni Conventional Xenon Sounder Beacon
- High output sounder beacon.
- 12V, 24V and mains module option.
- Choice of lens colour options.
- Automatic sounder synchronisation.
-
Fulleon Solista Conventional LED Beacon Red Case / Clear Lens
- Ultra low current.
- LED technology.
- High reliability.
- Long service life.
- Locking base.
- Compact size.
-
Fulleon RoLP LX Roshni Wall Sounder Flasher – Red
- Ultra Low Current Consumption
- Up to 7.5M Coverage
- Switchable Flash Rate
- IP65 Protected
-
Fulleon SQG3 Base Sounder in White Housing
- Conventional platform sounder.
- Supplied in white housing.
-
Fulleon Squashni Conventional Platform Sounder
- Fixing platform for detector or beacons
- Low current consumption
- Blank cover for use as a stand alone sounder
- Reduced installation cost
- Colour matched to leading manufacturers detectors
- Tamper proof cap
-
Fulleon Symphoni Low Current Wall Sounder
- Low 5mA current consumption.
- 100dB(A).
- Automatic synchronisation.
- Weatherproof option.
-
Fyreye MKII Conventional Fyreye Fixed Heat (CS) Detector
- Designed to meet EN54 requirement
- Lockable to base to stop unauthorised removal
- Remote LED output
-
Hochiki CDX Conventional Smoke Detector
- Removable high performance chamber
- Automatic sensitivity window verification
- Approved by LPCB and VdS
-
Gent ES Detect Conventional Heat Detector
- Range of detection technologies with advanced microprocessor controlled detection
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life
- Compatible with diode base to monitor detector removal
-
Gent ES Detect Conventional Standard Base With or Without Diode
- Standard base for ES Detector conventional Gent detectors.
- Available with optional diode.
-
Gent ES Optical Smoke Conventional Detector
- Optical smoke detector for early detection of fire.
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life.
- Compatible with diode base to monitor detector removal.
-
Gent Indoor Conventional Manual Call Point
- Fully compliant with EN54, Part 11.
- Choice of re-settable or glass operating element option.
- Semi-flush or surface mounting.
- 470 Ohm resistor.
-
Gent Weatherproof Conventional Manual Call Point
- Fully compliant with EN54, Part 11.
- Glass operating element.
- Weather proof IP67.
- Supplied with surface mount back box.
-
GST DB-01D Common Conventional Detector Diode Base
- Common for all GST DC series detectors.
- Supports detectors locking to prevent unauthorised removal.
- Easy to install with standard mounting options.
-
GST DC-9101E Conventional Combination Smoke & Heat Detector
- Combined optical smoke and A2R class heat detector.
- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
-
GST DC-9102E Conventional Photoelectric Smoke Detector
- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
-
GST DC-9103E Conventional Rate-of-Rise & Fixed Temperature Heat Detector
- Self-diagnostic.
- Local test activation with reed switch.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
- Configurable polling LED support.
- Remote indicator output.
- 3 Programmable operating levels (A1R, A2S and BS).
-
Hochiki CDX Conventional Combined 60 Degree Heat Detector
- Electronic linear heat detection
- Twin fire LEDs allow 360° viewing
- Approved by LPCB & VdS
-
Hochiki CDX Conventional Fixed 60 Degree Heat Detector
- Electronic linear heat detection
- Twin fire LEDs for 360° viewing
- Wide voltage range of 9.5 to 30 V DC
-
Hochiki CDX Conventional Combined 90 Degree Heat Detector
- Electronic linear heat detection
- Incorporates a 90°C fixed temperature element
- Approved by LPCB & VdS
-
Hochiki CDX Conventional Fixed 90 Degree Heat Detector
- Electronic linear heat detection
- Remote indicator output
- Wide voltage range (9.5 to 30 V DC)
-
Hochiki CDX Conventional Mounting Base
- Integral remote indicator output
- Low profile, only 8 mm
- Rugged design and electronics free
-
Hochiki Conventional Schottky Diode Base in Ivory or White
- Integral remote indicator output
- In-line Schottky Diode for line continuity
- Low profile, only 8mm
-
Hochiki Conventional Beacon
- High Intensity LED technology
- Colour-matched to existing Ivory and White detector and base ranges
- Fits standard CDX base (YBN-R/6)
-
Hochiki Conventional Sounder Base (Ivory or White)
- Conventional Hochiki sounder base.
- Low current consumption.
- Easy to install.
- Maximum 93 dB(A) @ 1 metre (Tone 1).
- 32 user-selectable tones and 3 user-selectable volumes.
-
Hochiki Conventional Weatherproof 60 Degree Heat Detector in Ivory
- Waterproof design - rated to IP67
- Low profile shape
- Utilises a bi-metallic strip to sense temperature change
- No mounting base required
- No standby current
- Approved by LPCB & VdS
-
Eaton Conventional Enhanced Optical Smoke Detector
- Low profile design
- 360° viewable LED design
- Removable detector chamber for cleaning
-
Eaton Conventional Heat Detector
- Rate of rise, fixed at 77°C or fixed at 92°C models available.
- 360° visibility LED using lightpipe technology.
- Aesthetically pleasing.
- Quick and simple to install.
-
Eaton FXN922 Selectable Multi-Mode Conventional Detector
- 5 modes in 1 detector
- Chamber monitoring and drift compensation dual LED
- ‘Self-Check’ facility
-
Hochiki DCD-AE3M / DCD-CE3M Marine Approved Combined Heat Detector
- Electronic linear heat detection
- Fixed 60°C and 90°C versions available
- Wide voltage range (9.5 ~ 30 V dc)
- Approved by LPCB
- Approved to MED by GL
- GL Type approval
-
Hochiki Marine Conventional Photoelectric Smoke Detector
- Removable, high performance chamber.
- Automatic Sensitivity Window Verification (ASWV) – drift compensation technology.
- Remote indicator output.
- Wide voltage range (12 ~ 30 V dc).
- Low profile design with one piece outer cover.
- Single fire LED - 360° viewing.
- Range of mounting bases.
- Approved by LPCB & DNV-GL.
-
Hochiki Intrinsically Safe Conventional Smoke Detector
- Removable high performance chamber
- Automatic sensitivity window verification with drift compensation
- ATEX classification for intrinsic safety
-
Hochiki YBN-R/6M Marine Approved Standard Base
- Low Profile (only 8mm)
- Quick connections via square cable clamps
- Accepts 2.5 mm cables
- Bayonet slot, low insertion force for detectors
- Approved to MED by GL
- GL Type approval
-
Honeywell FS20X Dual IR & UV Flame Detector
- Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
- Wide operating temperature range
- Arc welding immunity
-
Identifire TriTone Conventional Sounder
- Approved to EN54-3 by UL.
- 96 dB(A) output.
- 6 mA current consumption.
- Low profile and subtle design.
-
Identifire VID Conventional VID Beacon Only
- Very bright VID beacon.
- Ideal for many general signalling applications.
- Can be grid mounted for industrial applications.
- Five different lens colours available.