Kentec

• Monitor multiple alarm networks with TCP/IP support
• Full device level graphics with automatic site map switching
• Compatible with Taktis EN & UL, Syncro AS & Elite RS panels

• Single loop analogue addressable panel with multi-protocol support
• Cost-effective solution for smaller standalone installations
• EN54-2 and EN54-4 certified with 3A power supply

• Expandable 1-2 loop system with multi-protocol support (Apollo, Argus Vega, Hochiki)
• Network up to 64 panels with optional fault tolerant network card
• EN54-2 and EN54-4 certified with 3A power supply and removable chassis

• Three detection zones with flexible zone combinations
• Built-in extract fan control functionality
• EN12094-1, EN54-2 & EN54-4 approved

• Dual extinguishant outputs with main/reserve facility
• EN12094-1, EN54-2 & EN54-4 approved
• Two fully monitored coincidence inputs

• Multi-area control - 1 to 4 extinguishant areas
• Dual extinguishant outputs per area with main/reserve configuration
• EN12094-1, EN54-2 & EN54-4 approved

• BS EN12094-1 certified when used with Sigma XT control equipment
• High brightness LED indication with detailed panel status
• Countdown timer shows time remaining until release

• Compatible with all EN approved Kentec extinguishing panels
• Shrouded push button prevents inadvertent operation
• Holds extinguishant release countdown when activated

• Large red mushroom head pushbutton for high visibility
• Twist to release latching action prevents accidental reset
• Compatible with all Sigma XT+ control panel models

• Controls extract fan plant for fire protection systems
• Common '901' keyswitch with key trapped in operated position
• Compatible with all Sigma XT and Sigma XT+ models

• Common '901' keyswitch standard across fire systems
• Compatible with Sigma XT and Sigma XT+ models
• Surface or single gang flush mounting options

• Apollo AlarmSense 2-wire control panel
• Available in 2, 4 or 8 zone sizes
• Available in Surface or Flush Mounting Options
• Auxillary power supply

• Fully certified to BS EN54-2 and BS EN54-4
• 2, 4 or 8 version zones
• Surface and Flush Mounting Options

• Two, four or six way units available
• Apollo, Argus Vega or Hochiki protocols available
• Integral power supply
• Robust steel enclosure matches Syncro control panel styling
• Space for 7Ah batteries
• Power Healthy and Power Fault indicators

• Up to 504 LED’s can be controlled from any Taktis Fire or Syncro AS panel.
• Full colour printing.
• Available in a range of standard enclosures to suit any applications.
• Bespoke sized units can be made upon request.
• Choice of Red, Green or Yellow LED’s.
• Available with or without controls.

• Kentec 2 position controls enabled keyswitch.
• Replacment for Syncro and Sigma range of panels.

• Fully welded, all steel construction
• Tough epoxy powder coated finish
• Key lockable
• Wide range of styles and sizes
• Up to 65Ah batteries can be fitted
• Fully enclosed and robust construction

• 24V DC powered boxed ancillary board
• Two-wire serial RS485 connection with additional power cores
• Volt-free relay outputs for remote subsystem control

• Compatible with Kentec panels ending M1, M2, L2, H2, F2, M3, H3, D3, M4
• Complete barrel and key assembly set with model 801 key
• Mini camlock design for Kentec and Syncro panel cabinets

Enter a brief description of your product here. This description will be displayed on product list pages.

• Universal compatibility with Syncro, Solo and Solex panels
• Essential for panel programming and commissioning
• Works with Loop Explorer configuration software

• Matches design & colour scheme for standard Sigma CP/XT and Syncro AS control panel ranges.
• Easy to install.
• Key Lockable.
• Designed for versatility.
• Choice of small or large capacity enclosure.

• Spare keys for control panels
• Compatible with Sigma, Taktis, Syncro
• Pack of five keys

Enter a brief description of your product here. This description will be displayed on product list pages.