No
Showing 101–150 of 387 results
-
Zeta ZP4 Addressable Manual Call Point, MK1 Protocol
- Indoor call point compatible with Zeta MK1 legacy addressable panels
- Supplied with backbox for surface mount installations (optional flush mount bezel available)
- Very high visibility of the alarm condition
-
Notifier M700 Addressable Manual Call Point
- Plug & play installation
- Resettable operating element option
- Analogue addressable communications
- Semi-flush or surface mounting
-
Nittan Evolution H2 Addressable Heat Detector with Short Circuit Isolator
- Heat category P (A1R/A2S/BS/CS)
- Integral -ve short circuit isolator
- Evolution FSK protocol
- EEPROM addressed with programmer
-
Nittan Evolution PY Addressable Optical Smoke Detector with Short Circuit Isolator
- Integral -ve short circuit isolator
- Improvements to smoke sensing chamber
- Orange LED, which significantly improves response across the fire spectrum
- Chamber construction is also designed to minimise the effect of dirt/dust contamination
-
Nittan Evolution PYH Addressable Optical & Heat Multi-Sensor Detector
- Replaces EV-PH from September 2024
- Orange optic LED and PY type Chamber
- 3 sensitivity settings
- Heat category A1R
-
Nittan Evolution PYH Addressable Optical & Heat Multi-Sensor Detector with Short Circuit Isolator
- Orange optic LED and PY type chamber
- 5 sensitivity settings
- Heat category P (A1R/A2S/BS/CS)
- Integral -ve short circuit isolator
-
Fire-Cryer Solo Voice Base Sounder with Single Fixed Message
- No special wiring, easily retro-fitted
- Fully synchronised
- Uses rocking armature technology for highly intelligible speech
-
-
System Sensor 10-70m Reflective Optical Beam Smoke Detector
- Unique servo-operated test filter
- Combined transmitter and receiver unit
- Range 10 – 70 meters, 70-100 meters with long range kit
- 4 x fixed sensitivity/threshold levels
-
System Sensor Addressable Waterproof Call Point with Isolator
- Sealed to IP67
- Integral short circuit isolator
- Unique ‘Plug & Play’ installation concept
-
Apollo Series 65 Optical Smoke Detector
- Responds to slow fires
- Suitable for bedrooms
- Unaffected by wind
-
Apollo Series 65 Conventional Heat Detector
- Series 65 conventional heat detector.
- Choice of 4 heat classes.
- Ideal for environments that are dirty or smoky under normal circumstances.
-
Fyreye MKII Conventional Optical Smoke Detector
- Conventional optical smoke detector
- Compatible with most conventional systems
- 8 alarm indication LEDs
-
Fyreye MKII Conventional Rate of Rise and Fixed Heat Detector
- Conventional heat detector wirth Rate of Rise or Fixed Heat trigger @ 57 °C
- Compatible with most conventional systems
- 8 alarm indication LEDs
-
Fyreye MKII Conventional Fixed Heat Detector
- Conventional fixed high-temperature heat detector
- Compatible with most conventional systems
- 8 alarm indication LEDs
-
ActiV Mounting Base
- Third-party certified to the relevant parts of EN54 in conjunction with our ActiV detectors
- Easy to fit with lots of working space
- Can be ceiling mounted in any orientation due to the true 360° degree viewing angle of the LED indicator strips on all ActiV detectors
- Integrated detector/base locking mechanism, head removal tool and ID tag
- Simple ‘click and twist’ design
- Remote LED terminals for the optional connection to a BF318 Remote indicator
- Bright tin plated steel terminals can accept fire rated cable of up to 2.5mm in diameter
- C4408D diode and C4408 non-diode bases available*
- Compatible with C-TEC’s entire range of ActiV conventional smoke and heat detectors
-
Agrippa Acoustic Digital Pillow Alarm
- No installation.
- Portable device.
- Listen and learn technology.
- Flashing red LED visual warning.
-
Agrippa Deaf Alert Home Pillow Fire Alarm
- Easy to install and set up.
- Fail-safe dual power supply.
- Smoke alarm included.
- Vibrating pad to alert the deaf, hard of hearing, children, heavy sleepers or people on medication in the event of a fire.
-
Apollo 55000-274 XP95 Multi-Tone Weatherproof Open-Area Sounder
- Updated to include choice of tones: Apollo, slow whoop and DIN.
- Two volume settings 92dB(A) and 100dB(A).
- Synchronisation of tones.
- Individual and group addressing.
- Loop Powered.
- IP66 rated.
-
Apollo 58000-305 Discovery CO & Heat Multisensor Detector
- Responds to smouldering and flaming fires.
- Less susceptible to false alarms caused by steam and dust.
- Five response modes.
- Remote test feature.
-
Apollo Addressable Weatherproof Manual Call Point with Optional Isolator
- IP67 rated (suitable for installation outside)
- Compatible with XP95 or Discovery systems
- EN54-11 approved
- Optional version with isolator available
- E-Z fit connectors
-
Apollo AlarmSense Manual Call Point
- Resettable operating element.
- Easy access, front reset mechanism.
- Suitable for semi-flush or surface mounting.
-
Apollo Discovery 58000-005 Open-Area Combined Sounder & VID
- 15 tone pairs.
- Individual control of the sounder and visual indicator.
- Volume and tone settings can be selected from the control panel.
- Tones can be used for other purposes in addition to warning of fire, making the device ideal for use in schools etc.
- Soft start option, ideal for hospitals and nursing homes.
- Group and global control for increased response time.
-
Apollo Discovery 58000-300 Carbon Monoxide Detector
- Early warnign of carbon based smouldering fires.
- Resistance to false alarms in areas with high levels of steam and other airborne particles.
- Ideal for protecting small volume sleeping risk areas.
- Resitance to contamination in dirty and dusty conditions.
- Excellent supplement to fire detection systems to improve detection of smouldering hydrocarbon fires.
-
Apollo Discovery Heat Detector
- Ideal in environments that are dirty or smoky under normal conditions
- Well-suited to warehouses, loading bays and car parks
- Unaffected by wind or atmospheric pressure
- Five response modes
- Remote test feature
-
Apollo Discovery Manual Call Point with Isolator
- Plug and Play’ terminal connections for fast wiring
- Continuity link for wiring test before commissioning
- Reports an alarm in under 0.2 seconds
- Resettable element
-
Apollo Discovery Marine Heat Detector
- Approved for use in the marine environment
- Five response modes for environmental adaptation
- Day/night switching for increased flexibility
- Drift compensation for false alarm reduction
- User programmability for data
- XPERT card addressing for increased security
- Ideal in environments that are dirty or smoky
- Unaffected by wind or atmospheric pressure
- Remote test feature
-
Apollo Discovery Marine Multisensor Detector
- Ideal for a wide range of applications.
- Enhanced false alarm management.
- Unaffected by wind or atmospheric pressure.
- Well suited to sensitive environments.
- Five EN54 approved response modes.
- Heat only and optical only options.
- Remote test feature.
-
Apollo Discovery Marine Optical Smoke Detector
- Responds well to slow-burning, smouldering fires
- Suitable for bedrooms and escape routes
- Unaffected by wind or atmospheric pressure
- Remote test feature
- Rejection of transient signals
-
Apollo Discovery Multisensor Detector
Key Features
- Ideal for a wide range of applications
- Enhanced false alarm management
- Recommended, in specific modes, for hotel bedrooms and hospital wards
- Unaffected by wind or atmospheric pressure
- Well-suited to sensitive environments
- Five EN 54 approved response modes
- Heat only and optical only options
- Remote test feature
-
Apollo Discovery Optical Smoke Detector
- Photo-electric detection ideal for slow burning and smouldering fires
- Five EN54 approved response modes for flexible sensitivity settings
- Digital communication compatible with Discovery, XP95 and CoreProtocol systems
-
Apollo Discovery Sounder & VAD Base, White Flash, Open Category, Isolator
- EN54-23 category 'O' VAD beacon (white flash).
- Two-tone EN54-3 sounder.
- Multiple selectable volume.
- Works on XP95, Discovery & CoreProtocol.
-
Apollo Discovery Sounder Base with Isolator
- 15 pairs of tones
- It is possible to set individual volume of the sounder from the fire control panel
- Tones can be used for other purposes in addition to warning of fire, ideal for schools
- Enables soft start option, ideal for hospitals and nursing homes
- Unique acoustic and visual indicator self-test
-
Apollo Discovery Sounder Visual Indicator Base
- Individual Control of the Sounder and visual Indicator
- Tones Can Be Used for other Purpouses
- Electronic Bell Tone
-
Apollo Discovery Weatherproof Manual Call Point, Isolator, KAC Style
- Suitable for weatherproof applications.
- Discovery & XP95 compatible.
- KAC style enclosure.
-
Nittan EVC-IR Evolution Conventional Dual Band IR Flame Detector
- Dual band IR flame detector from Nittan
- Omniview 360° LED
- Internal alarm current limiting resistor
-
Apollo XP95 Addressable Open-Area VID
- Available in red, amber, and clear lens with red flash
- Digital communication compatible with XP95, Discovery, and CoreProtocol
- Designed for indoor use with IP23D rating
-
Apollo Orbis Conventional Optical Smoke Detector
- Improved sensitivity to black smoke
- Compensation for build-up of dirt
- Extra confirmation of smoke before an alarm signal is given
-
Apollo Orbis Conventional Optical Smoke Detector, Non-Latching
- Improved sensitivity to black smoke
- Compensation for build-up of dirt
- Extra confirmation of smoke before an alarm signal is given
-
Apollo Orbis Timesaver Diode Detector
- Designed for seamless integration with Orbis systems
- Simplifies installation and enhances detector performance
- Ensures reliability and compatibility with various fire alarms
-
Apollo Orbis TimeSaver Sav-Wire Base
- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Detector locking mechanism
- Is used in 'Sav-Wire' systems
-
Apollo SC2900-001 Conventional Manual Call Point
- Resettable operating element.
- Easy access, front reset mechanism.
- Ergonomic reset key.
- EN54-11 certified.
- 170° viewable LED.
- Suitable for flush or surface mouting.
- Optional hinged cover.
-
Apollo Series 65 12V DC Relay Base
- Detector locking mechanism
- One way fit
- Easy to wire
- Contains an earth connector
- Can be used in fire and security systems
-
Apollo Series 65 Diode Base
- Detector locking mechanism
- Easy to wire
- Contains an earth connector
- Terminal for remote indicator
-
Apollo Series 65 End-of-Line Relay Base
- Detector locking mechanism
- One way fit
- Easy to wire
- Contains an earth connector
-
Apollo Series 65 Sav-wire Base
- Allows Series 65 conventional detection to work on Sav-Wire panels
- Detector locking mechanism
- Contains an earth connector
- Easy to wire
-
Apollo Series 65 Standard Base
- Detector locking mechanism
- Easy to wire
- Contains an earth connector
- Terminal for remote indicator
-
Apollo Series 65 Standard Relay Base
- Detector locking mechanism
- One way fit
- Easy to wire
- Contains an earth connector
-
Apollo Weatherproof Multi-Tone Open-Area Sounder Visual Indicator with Isolator (Red)
- Choice of tones on standard device: Apollo, Slow Whoop, and DIN.
- IP66 rated.
- Two Volume settings 92dB(A) and 100dB(A).
- Synchronisation of 'alert' and 'evacuate' tones.
- Individual and group addressing.
- Built in isolator.
-
Apollo XP95 Addressable Call Point with Isolator
- EN54-11 Approved (EN54-17 Approved for Isolator version)
- E-Z fit connectors
- Front facing addressing without the need to detach the backbox
- A unique, ergonomically designed key for resetting and front cover removal
- Backward compatibility and retro-fit
- Resettable element