Indoor
Showing 351–400 of 440 results
-
Fulleon Solista Conventional LED Beacon Red Case / Clear Lens
- Ultra low current.
- LED technology.
- High reliability.
- Long service life.
- Locking base.
- Compact size.
-
Fulleon SQG3 Base Sounder in White Housing
- Conventional platform sounder.
- Supplied in white housing.
-
Fulleon Squashni Conventional Platform Sounder
- Fixing platform for detector or beacons
- Low current consumption
- Blank cover for use as a stand alone sounder
- Reduced installation cost
- Colour matched to leading manufacturers detectors
- Tamper proof cap
-
Fulleon Symphoni Low Current Wall Sounder
- Low 5mA current consumption.
- 100dB(A).
- Automatic synchronisation.
- Weatherproof option.
-
Fyreye MKII Conventional Fyreye Fixed Heat (CS) Detector
- Designed to meet EN54 requirement
- Lockable to base to stop unauthorised removal
- Remote LED output
-
Hochiki CDX Conventional Smoke Detector
- Removable high performance chamber
- Automatic sensitivity window verification
- Approved by LPCB and VdS
-
Gent Addressable Manual Call Point
- Resettable or break glass.
- Lift up protective covers.
- Keyswitch
- Weatherproof version (IP67) suitable for external areas
- Up to 200 per loop
- Integral short-circuit isolator
- Surface or Semi Flush options
-
Gent ES Detect Conventional Heat Detector
- Range of detection technologies with advanced microprocessor controlled detection
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life
- Compatible with diode base to monitor detector removal
-
Gent ES Optical Smoke Conventional Detector
- Optical smoke detector for early detection of fire.
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life.
- Compatible with diode base to monitor detector removal.
-
Gent Indoor Conventional Manual Call Point
- Fully compliant with EN54, Part 11.
- Choice of re-settable or glass operating element option.
- Semi-flush or surface mounting.
- 470 Ohm resistor.
-
Grove IP20 LED Emergency Twinspot
- 720 lumen emergency output with 15 LEDs per head
- 50% lower power consumption than tungsten halogen
- Can be mounted in any orientation
-
GST DC-9101E Conventional Combination Smoke & Heat Detector
- Combined optical smoke and A2R class heat detector.
- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
-
GST DC-9102E Conventional Photoelectric Smoke Detector
- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
-
GST DC-9103E Conventional Rate-of-Rise & Fixed Temperature Heat Detector
- Self-diagnostic.
- Local test activation with reed switch.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
- Configurable polling LED support.
- Remote indicator output.
- 3 Programmable operating levels (A1R, A2S and BS).
-
GU32 IP20 LED Emergency Twinspot
- 385 lumen output with 3.2W power consumption
- Carry handle for enhanced portability
- Health indicator feature for system monitoring
-
Hochiki CDX Conventional Combined 60 Degree Heat Detector
- Electronic linear heat detection
- Twin fire LEDs allow 360° viewing
- Approved by LPCB & VdS
-
Hochiki CDX Conventional Fixed 60 Degree Heat Detector
- Electronic linear heat detection
- Twin fire LEDs for 360° viewing
- Wide voltage range of 9.5 to 30 V DC
-
Hochiki CDX Conventional Combined 90 Degree Heat Detector
- Electronic linear heat detection
- Incorporates a 90°C fixed temperature element
- Approved by LPCB & VdS
-
Hochiki CDX Conventional Fixed 90 Degree Heat Detector
- Electronic linear heat detection
- Remote indicator output
- Wide voltage range (9.5 to 30 V DC)
-
Hochiki CHQ-AB ESP Addressable Beacon
- High Intensity LED technology
- Choice of Red, Amber or Blue lens colour
- Approved by VdS
-
Hochiki CHQ-ARI Addressable Remote Indicator
- Addressable remote LED indicator for Hochiki ESP range
- High Intensity LED technology
- Addressable via Hand Held Programmer (TCH-B100)
-
Hochiki Conventional Beacon
- High Intensity LED technology
- Colour-matched to existing Ivory and White detector and base ranges
- Fits standard CDX base (YBN-R/6)
-
Hochiki Conventional Sounder Base (Ivory or White)
- Conventional Hochiki sounder base.
- Low current consumption.
- Easy to install.
- Maximum 93 dB(A) @ 1 metre (Tone 1).
- 32 user-selectable tones and 3 user-selectable volumes.
-
Eaton Conventional Enhanced Optical Smoke Detector
- Low profile design
- 360° viewable LED design
- Removable detector chamber for cleaning
-
Eaton Conventional Heat Detector
- Rate of rise, fixed at 77°C or fixed at 92°C models available.
- 360° visibility LED using lightpipe technology.
- Aesthetically pleasing.
- Quick and simple to install.
-
Eaton FXN922 Selectable Multi-Mode Conventional Detector
- 5 modes in 1 detector
- Chamber monitoring and drift compensation dual LED
- ‘Self-Check’ facility
-
Hochiki ESP Addressable Smoke Vent Manual Call Point in Orange with SCI
- Terminals can accommodate up to a 2.5 mm solid conductor
- Orange casing
- Features an integral SCI
- Approved by LPCB to EN54-11:2001
-
Hochiki ESP Analogue Dual Input Module With DIN Option
- Single Loop Address
- Loop Powered
- DIN Rail Version Available
- Integeral SCI
-
Hochiki ESP Analogue Dual Relay Controller with DIN Rail Option
- Loop Powered
- Single Loop Address
- Auxillary Monitored Input
- DIN Rail Version Available
-
Hochiki ESP Mains Relay Controller With SCI With DIN Rail Option
- Loop Powered
- Single Loop Address
- DIN Rail Option
- Aux Monitored Input
-
Hochiki ESP Analogue Plant Control Module with DIN Rail Option
- Simgle Loop Address
- Loop Powered
- DIN Rail Version Availanle
- Approved by LPCB
-
Hochiki ESP Dual Sounder Controller with SCI with DIN Rail Option
- Single Loop Address
- Two Independant Sounder Circuits
- DIN Rail Version Available
- Auxillary Monitored Input
-
Hochiki ESP Dual Zone Monitor with SCI With DIN Rail Option
- Single Loop Address
- Requires an Aux 24V Supply
- DIN Rail Version Available
- Intrinsically Safe Version Available
-
Hochiki ESP Single Zone Monitor with SCI with DIN Option
- Loop Powered
- Single Loop Address
- Remote LED Output
- DIN Rail Version Available
-
Hochiki ESP Single Input Module
- Single Monitored Input
- Small Design
- Flying Leads for Easy Installation
- Approved by LPCB & VdS
-
Hochiki ESP Powered Output Module
- 24V Supply at Various Currents
- User Selectable Output
- Two Monitored Inputs
- Colour Coded Flying leads for easy installation
-
Hochiki ESP Device Address Programmer
- Recently been restyled to provide a more rugged yet light enclosure.
- Handheld programming tool for Hochiki ESP devices.
- Lightweight design.
- Battery operated with a capacity of 8,000 operations.
-
Hochiki Sav-Wire Manual Call Point
- Designed for use on “Savwire” (two-wire) systems
- Approved to EN54-11:2001
- Terminals can accommodate up to a 2.5 mm² solid conductor
-
Identifire TriTone Conventional Sounder
- Approved to EN54-3 by UL.
- 96 dB(A) output.
- 6 mA current consumption.
- Low profile and subtle design.
-
Identifire VID Conventional VID Beacon Only
- Very bright VID beacon.
- Ideal for many general signalling applications.
- Can be grid mounted for industrial applications.
- Five different lens colours available.
-
KAC ENscape Sounder Conventional Sounder Shallow Base Only
- Conventional sounder from KAC.
- Available with low profile or deep mounting base (IP65).
- 32 tones all approved to EN54-3.
-
Menvier Surface Manual Callpoint C/W Backbox Optional Weatherproof (CX201, MBG914, FX201)
Key Features
- High visibility status LED
- Standard and weatherproof versions available
- Wide range of accessories
- Heavy duty terminals
- Quick and simple to install
- Fast fit clip on front cover
- Single tool for test and access
-
Morley-IAS Addressable Manual Call Point with Optional Short Circuit Isolator
- Addressable manual call point for DX Connexion panel range.
- Optional built-in short circuit isolator.
-
Nittan EVC-P Evolution Conventional Optical Detector
- Optical smoken detector from Nittan.
- Omniview 360° LED.
- Internal alarm current limiting resistor.
- Wide operational voltage range (12v-32v).
-
Nittan Evolution Indoor Manual Call Point
- Resettable manual call point for Nittan Evolution protocol
- IP24 rated housing, suitable for indoor applications
- DIL switched addressed
-
Nittan Evolution Conventional Heat Detector
- 62°C or 92°C conventional heat detector from Nittan.
- Omniview 360° LED.
- Internal alarm current limiting resistor.
- Wide operational voltage range (12v-32v).
-
Nittan EVC-DP Evolution Conventional Dual Optical Detector
- Dual Optical Detector Reduces False Alarms.
- Omniview 360° LED.
- Internal Alarm Current Limiting Resistor.
- Wide Operational Voltage Range (16v-32v).
-
ActiV Conventional Optical Smoke Detector
- High-quality optical smoke detector
- Drift compensation functionality
-
ActiV Conventional Heat Smoke Detector
- Heat Class A1r, A2 & B
- Third-party certified to EN54-5 by Intertek
- Carries the pan-European ‘CertAlarm’ mark
-
ActiV Conventional Multi-Sensor Fire Detector
- Optical + heat multi-sensor
- Drift compensation functionality